|
hammerhead
Apr 13, 2006, 12:49 PM
Post #1 of 6
(2179 views)
Shortcut
Registered: Mar 3, 2004
Posts: 371
|
Hi, What size is typically used, 1/4" or 3/8"? Al
|
|
|
|
|
mesomorf
Apr 13, 2006, 1:12 PM
Post #2 of 6
(2179 views)
Shortcut
Registered: Feb 3, 2002
Posts: 397
|
3/8" or 1/2". Depending on the application (long term, heavy use as opposed to bail) think about stainless steel. Edit: I mean 5/16" or 3/8".
|
|
|
|
|
tradmanclimbs
Apr 13, 2006, 1:13 PM
Post #3 of 6
(2179 views)
Shortcut
Registered: Apr 24, 2003
Posts: 2599
|
Depends on the application. 1/4" may be ok for a single bail off (I prefer an old biner with gate taped shut) For a fixed anchor that others will use I install 3/8ths.
|
|
|
|
|
stymingersfink
Apr 14, 2006, 12:16 AM
Post #4 of 6
(2179 views)
Shortcut
Registered: Aug 12, 2003
Posts: 7250
|
7mm and 10mm links are offered by petzl, probably similar sizes by other companies as well. Perhaps a better question is; would you purchase one which was not rated (to imply individual 3-sigma testing) in kN? Why? Screw the quick-link unless you're installing anchors. Use a(n) (pair of) oval(s) as a bail-point. These may be easily removed by subsequent parties, so they will not become an eye-sore as a quick-link may when the gate is impossible to open.
|
|
|
|
|
redzit
Apr 21, 2006, 8:16 PM
Post #5 of 6
(2179 views)
Shortcut
Registered: Mar 6, 2002
Posts: 195
|
What size you need depends on the intended use. If you are looking for something you can use to bail out on, then 1/4" is fine. If you are looking to set up a long term anchor in a public climbing area, then i woulf recommend at least 2 3/8", used in pairs, although, 1/2" is far more preferable.
|
|
|
|
|
therealbovine
Apr 21, 2006, 8:42 PM
Post #6 of 6
(2179 views)
Shortcut
Registered: Jan 10, 2003
Posts: 270
|
Use the ones stamped with "Mallion Rapide" on the side, not the ones stamped "China". The Mallion Rapide stamped quick-links are better quality and the hex shaped locking mechanism (gate) has smooth, chamfered edges, which are easier on the hands, rope and allow more room for carabiners. I personnaly would never use 1/4". Use a 3/8" or larger as a minimum. Stainless is another thought as mentioned previously. I beleive the Petzl versions are too small to use as a comparrison to something you'd buy at the hardware store. A few of the Petzl versions I have seen were aluminum, intended more for caving applications. Be sure to get the steel version for rock climbing applications. Best of luck!
|
|
|
|
|
|