|
dr_feelgood
Jan 20, 2007, 12:11 AM
Post #1 of 12
(1939 views)
Shortcut
Registered: Apr 6, 2004
Posts: 26060
|
Where can i pick some up on the internet... I tried GearExpress, REI and Moosejaw... Most just have pitons and regular hooks... As i haven't been climbing long enough to feel 'worthy' to pound pins(completely different subject... I'll explain by PM if someone needs one), I want to buy some camming hooks to go with my regular hooks. Thanks in advance.
|
|
|
|
|
shimanilami
Jan 20, 2007, 12:33 AM
Post #2 of 12
(1926 views)
Shortcut
Registered: Jul 24, 2006
Posts: 2043
|
http://www.mountaintools.com/cat/rclimb/bolts/leepercamhooks.htm
|
|
|
|
|
holdplease2
Jan 20, 2007, 6:12 AM
Post #3 of 12
(1904 views)
Shortcut
Registered: Dec 18, 2002
Posts: 1733
|
Hey Dr. Feelgood: Not that you asked but... Have fun with your camming hooks. As an FYI, there are four sizes. The most useful ones for avoiding nailing are probably the two smallest. The third smallest (second largest) works in slightly larger places where a small cam would do. The largest of all, the fragile flake hook, isn't used much (I don't think, anyway). If you get to the point that you are cam hooking for speed rather than (good) style, then maybe get the other two sizes. :) -Kate.
|
|
|
|
|
musicman1586
Jan 20, 2007, 6:32 AM
Post #4 of 12
(1898 views)
Shortcut
Registered: Oct 26, 2005
Posts: 488
|
Pika Mountaineering makes an assortment, http://www.pikamtn.com/pages.html You can buy them through Liberty Mountain and Advanced Base Camp, although they don't show them on their website, but they are in the catalogs, so I dunno why their not on the website.
|
|
|
|
|
guanoboy
Jan 20, 2007, 6:42 AM
Post #5 of 12
(1891 views)
Shortcut
Registered: Jan 2, 2004
Posts: 244
|
dr. feelgood- i've had a lot of bad luck with the large fragile flake camming hook - i find it way to flexible for my 180lb body and 40lbs of gear. The regular leeper and small leepers are great though - fast and would even hold a small fall in some cases. have fun
|
|
|
|
|
flamer
Jan 21, 2007, 11:02 PM
Post #6 of 12
(1844 views)
Shortcut
Registered: Oct 22, 2002
Posts: 2955
|
musicman1586 wrote: Pika Mountaineering makes an assortment, http://www.pikamtn.com/pages.html You can buy them through Liberty Mountain and Advanced Base Camp, although they don't show them on their website, but they are in the catalogs, so I dunno why their not on the website. Don't buy Pika cam hooks. They are much lower quality then the leeper cam hooks. I've talked with more than one person who broke the pikas. josh
|
|
|
|
|
west_coast_climber
Jan 22, 2007, 2:33 AM
Post #7 of 12
(1784 views)
Shortcut
Registered: Oct 29, 2004
Posts: 41
|
flamer wrote: Don't buy Pika cam hooks. They are much lower quality then the leeper cam hooks. I've talked with more than one person who broke the pikas. ditto. buy leeper or don't buy at all... in canada, MEC sells the leepers...
|
|
|
|
|
tattooed_climber
Jan 22, 2007, 2:42 AM
Post #8 of 12
(1779 views)
Shortcut
Registered: Dec 13, 2003
Posts: 4838
|
PIKA SUCKS!!!!!!!!!!!!!! i wouldn't hang my empty solo tag rack off those fucking hooks.....last time i used my ONE pika cam hook, ahem, i fucking hammered 'er in home cus i was out of KBs the #3 flat flake hook is the ONLY good and useful product they make they need to make alot of changs before i get anything else by them... DR. feelgoooooood; buy leeper, you'll never look back on it..
(This post was edited by tattooed_climber on Jan 22, 2007, 2:42 AM)
|
|
|
|
|
stymingersfink
Jan 22, 2007, 6:27 AM
Post #9 of 12
(1750 views)
Shortcut
Registered: Aug 12, 2003
Posts: 7250
|
I'd have to voice some discontent with kate's statement, but only on one minor point... the only falls I've taken from Leeper cam-hooks have involved the micro cam-hook... perhaps because I've attempted to use it in "clean" desperation when a different tool (thin iron)would have been more effective. Oh well, I still carry it on my rack of hooks, but I don't carry two of them as I do the "medium" and "large" sizes. Those bastards are indispensable, for "clean" and "speed" purposes. As far as the "Pika" stuff goes... I've heard such sentiment on more than one occasion. One only needs to examine them in comparison to leeper's to see why.
|
|
|
|
|
musicman1586
Jan 22, 2007, 6:53 AM
Post #10 of 12
(1742 views)
Shortcut
Registered: Oct 26, 2005
Posts: 488
|
*shrugs* I dunno, I don't own any aid gear, my work just has alot of random catalogs around where we order various gear from with Liberty Mountain being one.
|
|
|
|
|
stymingersfink
Jan 23, 2007, 1:21 AM
Post #11 of 12
(1666 views)
Shortcut
Registered: Aug 12, 2003
Posts: 7250
|
the metal they are made from is obviously a much lighter weight. On several of their cam hooks I have seen that they have given the metal a slight curve bend in the spoon end, which was probably intended to give the thing more rigidity, but will also limit the placement to cracks wide enough to fit the entire thing into. From personal experience, I can attest to the need for the entire thing to be strong. A leeper med. cam hook once caught me in a 6' daisy fall on a relatively slabby section (p 15 Zod, 20' off the belay), which kept me from a full-on factor 2 pendulum on the anchor itself. The arm was slightly tweeked at the bend into the spoon end, but I still use it to this day... a reminder to be careful when leepfrogging cam hooks with no gear between me and the anchor.
|
|
|
|
|
dr_feelgood
Feb 7, 2007, 2:57 AM
Post #12 of 12
(1511 views)
Shortcut
Registered: Apr 6, 2004
Posts: 26060
|
Bumptastic... I also want a bat hook or two... and now that my BD talons are on backorder, I'm fiending for them. Someone willing to hook me up with a retailer for some bathooks would be the shit in my book.
|
|
|
|
|
|