|
dalfollo
Jun 15, 2007, 5:59 AM
Post #1 of 3
(1406 views)
Shortcut
Registered: Sep 9, 2006
Posts: 46
|
Can anyone post or send me a couple close up pictures of the tubing corners and side connectors on an A5/TNF Double Portaledge??
I have to recreate a frame, and need a couple pictures to answer a few questions. I have most of the detailed tube types and diameters but not the lengths. If you can measure or have the lengths of tubes, please let me know:
6061-T6 1.125" OD/ 0.058" wall thickness:
- Side tubes: 4 x L" (length unknown)
- End/Foot Tube: 2 x L" (length unknown)
6061-T6 1" OD/ 0.083" wall thickness
- Side Joiners: 2 x 7"
- Double Butts: 8 x 3"
Maybe one photo as you start to put the corner together, then one as it is fully seated.
If you simpley want to just email the photos, you can use dalfollo@gmail.com
I appreciate this a lot.
Thanks.
|
|
|
|
|
soberpete
Jun 15, 2007, 6:45 PM
Post #2 of 3
(1367 views)
Shortcut
Registered: Jun 17, 2005
Posts: 25
|
Did you just buy the bed material recently on ebay? I was wondering if someone would snatch that up. I have the new BD double and will send some pics.
Peace,
Pete
|
|
|
|
|
dalfollo
Jun 15, 2007, 9:47 PM
Post #3 of 3
(1356 views)
Shortcut
Registered: Sep 9, 2006
Posts: 46
|
Actually I did. Conrad was clearing out some inventory, and I snagged a couple items.
Thanks so much for the pictures.
John Middendorf has released quite a bit of info on his www.bigwalls.net forum on how to build one from scratch, but not details on the corners and tube lengths.... I don't have a full unit available to me to clear certain things up.
Thanks again. you can send them to dalfollo at gmail dot com
(This post was edited by dalfollo on Jun 17, 2007, 3:42 AM)
|
|
|
|
|
|
