|
wigglestick
Oct 3, 2001, 10:00 PM
Post #1 of 6
(3768 views)
Shortcut
Registered: Jul 27, 2001
Posts: 1235
|
I was just wondering if anybody has played with these new toys and what you thought of them. They are 52 bucks each so they are definately no bargain. But they intrigue me. Any opinions www.splittergear.com
|
|
|
|
|
daryl512
Oct 4, 2001, 7:23 AM
Post #2 of 6
(3768 views)
Shortcut
Registered: Oct 2, 2000
Posts: 45
|
I don't own one but a friend has one and I was able to fiddle with his for a while. I really don't think that they are worth the $$ yet. I mean they aren't breakthrough technology opening up new route potential or anything so I can't justify spending that much on a cam that hasn't paid it's dues yet. the lobes are really wide which seems more ideal for sandstone, I think the would be a little tricky in areas like the gunks with alot of features in the cracks. Daryl
|
|
|
|
|
talons05
Oct 4, 2001, 5:10 PM
Post #3 of 6
(3768 views)
Shortcut
Registered: Aug 23, 2001
Posts: 1435
|
I've looked at these some before. Their size and configuration really doesn't provide anything that you can't get out of a similarly priced cam. The only real benefit I can see is that they tend to fight "cam walking" since there are only two opposed lobes... AW
|
|
|
|
|
elcapbuzz
Oct 4, 2001, 6:07 PM
Post #4 of 6
(3768 views)
Shortcut
Registered: Aug 24, 2001
Posts: 460
|
I recently hooked up with Splitter Gear at the OR tradeshow. I agree with talons05 about "cam walking" I also agree that you wouldn't want "all" of your cams to be 2cams, but it makes a very nice supplement to your other gear. The one thing that seperates 2cams from other gear is; it only has one trigger cable on one side and one side is flatter than other gear. (aleins, etc.) This allows shallower pocket placements and the trigger cable doesn't get in the way of the crack. Now, I'm not pluging Splitter Gear because they sponsor me, I truly think they have a place in the climbing world. Check out splittergear.com
|
|
|
|
|
number7
Oct 4, 2001, 7:25 PM
Post #5 of 6
(3768 views)
Shortcut
Registered: Oct 4, 2001
Posts: 175
|
I WOULD HAVE TO AGREE WITH DARYL512 ABOUT SPLITTERS BEING GOOD ON LIMESTONE BUT NOT AS EFFECTIVE ELSEWERE. I'M FROM THE NORTHEAST WITH A LOT OF QUARTZITE THAT CAN BE QUITE CHUNKY SOMETIMES. ALTHOUGH I HAVEN'T USED THEM, IT SEEMS THEY WOULDN'T BE TOO EFFECTIVE. IT SEEMS THERE ARE MORE OPTINS FOR THE "TRAD" GEAR.
|
|
|
|
|
jsm280
Oct 4, 2001, 8:14 PM
Post #6 of 6
(3768 views)
Shortcut
Registered: Jul 6, 2001
Posts: 77
|
With the wider area on the 2 cam you can acually end up with less surface area on the rock if the placement is in something other than a smooth crack. This is where 3 and 4 cam units are nice. They conform better to the rock giving better holding power. Just invision.... a crack or pocket that is not flat and something wide sitting on that surface.... BAD. These are better if you are in soft rock that is flat, or a close to perfect flat area in a crack because you then get more surface area on the rock and if the rock is soft it is less likley to give. Also figure PSI of the surface area of the cam. This can become a long discussion if you are not fimiliar with basic engineering concepts. In a nut shell a very large surface area can actually have less holding power compaired to a smaller surface area. Trade offs and balance is what yo should look for. BLA BLA BLA..... For the price I will let them sit, I see no great advantage, in fact a disadvantage for the places I climb.
|
|
|
|
|
|
|
|
|