|
GeneralZon
Mar 25, 2009, 6:21 PM
Post #2 of 13
(6405 views)
Shortcut
Registered: May 9, 2008
Posts: 273
|
I have use this exact Hilti SDS bit for drilling concrete. It worked like a charm. The concrete was really hard, 50+y.o. and had a lot of pebble like aggregate in it. I will have to check, but I think it is still in pretty good shape after some good hard use. At $30+S/H it is priced similarly to the Milwaukee or DeWalt SDS bits. Not sure what the shipping to Uzbekistan would be like though.
|
|
|
|
|
majid_sabet
Mar 25, 2009, 8:49 PM
Post #3 of 13
(6373 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
I got 12 of them for $30 off ebay last week plus $ 6 shipping.
|
|
|
|
|
Adk
Mar 25, 2009, 10:26 PM
Post #4 of 13
(6348 views)
Shortcut
Registered: Dec 2, 2006
Posts: 1085
|
You stole them!! Great deal MS.
|
|
|
|
|
rocknice2
Mar 25, 2009, 11:51 PM
Post #5 of 13
(6332 views)
Shortcut
Registered: Jul 13, 2006
Posts: 1221
|
The best bit out there. Super deal @ $36 / 12bits Along with your 20+ ice screws your the RC.com ultimate gear whore
(This post was edited by rocknice2 on Mar 25, 2009, 11:52 PM)
|
|
|
|
|
majid_sabet
Mar 26, 2009, 4:30 AM
Post #6 of 13
(6302 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
rocknice2 wrote: The best bit out there. Super deal @ $36 / 12bits Along with your 20+ ice screws your the RC.com ultimate gear whore I am gear whore but eventuality, all of my climbing gear will be donate to non profit organizations .
|
|
|
|
|
chossmonkey
Mar 26, 2009, 10:22 PM
Post #7 of 13
(6258 views)
Shortcut
Registered: Feb 1, 2003
Posts: 28414
|
majid_sabet wrote: I got 12 of them for $30 off ebay last week plus $ 6 shipping. They are dangerous and could have stress cracks. Please send them to me for free inspection.
|
|
|
|
|
anthonypmason
Mar 27, 2009, 3:42 PM
Post #8 of 13
(6223 views)
Shortcut
Registered: Apr 27, 2008
Posts: 18
|
These drill bits are designed for drilling through rebar in concrete, they work fairly well as long as you go slow as you drill through rebar infested concrete. I use them for my siesmic work in California. I have used them for setting anchors in rock and they tend to skate a little more than the standard sds bit, also if you are hand placing "hand drilling" the flutes on the hilti X heads tend to bind more and it will take more forearm strength to turn the drill. As for the price they are worth it for rebar/concrfete but for setting routes in rock I would stick with the standard bosch/hilti's they are around 6-7 bucks each and depending on the hardness of the rock/medium I have drilled around 20-30 holes per unit before the drill bits dull. Hope this helps Anthony
|
|
|
|
|
anthonypmason
Mar 27, 2009, 3:49 PM
Post #9 of 13
(6221 views)
Shortcut
Registered: Apr 27, 2008
Posts: 18
|
Just a fyi those hilti's X heads retail for around $30 bucks each for the 3/8" x6"
|
|
|
|
|
|
|
|
|
|
|
the_climber
Mar 28, 2009, 10:25 PM
Post #12 of 13
(6162 views)
Shortcut
Registered: Oct 9, 2003
Posts: 6142
|
anthonypmason wrote: These drill bits are designed for drilling through rebar in concrete, they work fairly well as long as you go slow as you drill through rebar infested concrete. I use them for my siesmic work in California. I have used them for setting anchors in rock and they tend to skate a little more than the standard sds bit, also if you are hand placing "hand drilling" the flutes on the hilti X heads tend to bind more and it will take more forearm strength to turn the drill. As for the price they are worth it for rebar/concrfete but for setting routes in rock I would stick with the standard bosch/hilti's they are around 6-7 bucks each and depending on the hardness of the rock/medium I have drilled around 20-30 holes per unit before the drill bits dull. Hope this helps Anthony Experiance has shown that the standard bosch bits are not the way to go. Out of the couple dozen Bosch bit's I have owned over the past 5+ years I have yet to get more than 10 holes out of any of them. The average being about six. Some were less than one hole. This is with both hand drilling and power drilling in dredominantly limesone, however a couple bits were used in quartzite, granite, and basaltic rocks. As for the Hilti's... I've only ever purchased one. In fact it was the first bit I purchased, and I'm still using it. I think I paid around $30 for it. I've hammered in somewhere around 50+ holes with it, and although it is not as sharp as day one it still drills a perfect hole, and still hand drills faster than a brandnew Bosch bit. I've put holes in Limestone, granite, quartzite, sandstone, and basaltic rock with that bit. I may retire it after next summer, but then again I said that last summer and the bit is still just fine. As for skating around more with the "X" profile. I have never found this to be the case.
(This post was edited by the_climber on Mar 28, 2009, 10:25 PM)
|
|
|
|
|
xtrmecat
Mar 28, 2009, 10:52 PM
Post #13 of 13
(6155 views)
Shortcut
Registered: Apr 1, 2004
Posts: 548
|
Majid, interested in getting rid of a couple of these? At a profit of course. They will do a job I've got in mind(project) just perfect. Bob
|
|
|
|
|
|