|
code08
Jun 23, 2009, 1:21 AM
Post #1 of 33
(27874 views)
Shortcut
Registered: Apr 2, 2009
Posts: 41
|
I've been climbing for a while now and have started climbing some harder sport routes. While this is great I end up having to bail from a route every now and then. I understand the idea of leaving a biner on the bolt so you don't have to leave fancy quick draws up there but the cheapest biners I can find are $5-7 a pop. I was wondering if there was a cheaper option and if there isn't what is the cheapest decent biner I can lower/rap off of?
|
|
|
|
|
milesenoell
Jun 23, 2009, 1:32 AM
Post #2 of 33
(27856 views)
Shortcut
Registered: Sep 19, 2006
Posts: 1156
|
Quick-links from a hardware store will bring the price down a little, but can be a pain in the ass for the next climber if you can't easily clip while the link is still in place. But really, is 5 bucks that much for getting you out of danger? You really want to teach yourself the Texas rope trick while looking down at rocks, stumps and talus?
Pretty soon you'll be good enough to be collecting other peoples bail 'biners, and will be happy to leave one of those 'biners that wasn't trustworthy enough to risk a fall on. I sure as hell don't do anything else with bootied 'biners.
|
|
|
|
|
jakedatc
Jun 23, 2009, 2:13 AM
Post #3 of 33
(27829 views)
Shortcut
Registered: Mar 12, 2003
Posts: 11054
|
stick clip aid. never left a biner yet.
|
|
|
|
|
angry
Jun 23, 2009, 2:17 AM
Post #4 of 33
(27824 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
I don't have to leave biners either, the bolts in CO are really close to each other though.
|
|
|
|
|
bill413
Jun 23, 2009, 2:26 AM
Post #5 of 33
(27811 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
Don't use quicklinks.
On occasion, I've bailed, then walked (or did another climb) to the top & rapped down to collect the biner.
Lowering off a bail biner is superior in safety to most of the other methods you could use.
|
|
|
|
|
angry
Jun 23, 2009, 2:29 AM
Post #6 of 33
(27806 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
Nah, the reason not to use a quicklink is that it can load the spine of the next biner to get clipped to the bolt. A bail biner is easier to remove.
|
|
|
|
|
bill413
Jun 23, 2009, 2:34 AM
Post #7 of 33
(27794 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
Oh, agreed Angry. I meant them to be two distinct statements.
|
|
|
|
|
Carnage
Jun 23, 2009, 4:44 AM
Post #8 of 33
(27726 views)
Shortcut
Registered: Mar 27, 2007
Posts: 923
|
picked me up someone else bail biner last weekend. it was a chounard rated to 2300 KG. im pretty excited
|
|
|
|
|
mounter
Jun 23, 2009, 5:14 AM
Post #9 of 33
(27711 views)
Shortcut
Registered: Jul 18, 2003
Posts: 133
|
Silly String, dental floss, and/or bailing wire.
|
|
|
|
|
bill413
Jun 23, 2009, 12:38 PM
Post #10 of 33
(27638 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
mounter wrote: Silly String, dental floss, and/or bailing wire.
Hmmm...
- Silly string: need a good steady hand to spray it through the bolt hanger...and, if you get it on your partner, you might rap off of him/her by mistake.
- Dental Floss: need to make sure the knots are appropriate & well dressed. I've found the EDK doesn't hold in floss as well as I'd like.
- Bailing wire: Helps to carry pliers with you to make the final twist to close it.
Each of these is good, but you just have to be aware that no one way is necessarily appropriate for all situations.
|
|
|
|
|
tigerlilly
Jun 23, 2009, 12:56 PM
Post #11 of 33
(27624 views)
Shortcut
Registered: Nov 2, 2006
Posts: 564
|
Well, if you don't have any luck finding booty biners, you can always watch the classifieds page on this site, cascadeclimbers.com or mountainproject.com, or hit your local gear swap if there is one. I got some old ovals and D's from a coworker who retired from climbing for practically nothing. I've seen them go for around $1-$2/each from time to time. Buy half a dozen and have a lifetime supply.
|
|
|
|
|
granite_grrl
Jun 23, 2009, 2:03 PM
Post #14 of 33
(27579 views)
Shortcut
Registered: Oct 25, 2002
Posts: 15084
|
There are many ways to cheat your way up a route, you need to learn some of them. That's the best way not to leave bail biners.
|
|
|
|
|
jeepnphreak
Jun 23, 2009, 5:28 PM
Post #15 of 33
(27512 views)
Shortcut
Registered: Jul 29, 2008
Posts: 1259
|
Go ahead and get a $5 biner that you would be willing to leave behind. If you are not too woried about weight yet pick up a steel gym biner for a few bucks. After a while you will leave a biner and find some that were left by some one else. Than that become your new bail biner. And thus the circle of life continues.
I have a great story to go with. A few years ago when I was gultiy of using quick links. I bailed on a route that had no off for a top rop. No way of rapping of the top. had to leave a quick link behind, marked with my tape configuration. three weeks later I was climbing four miles south of that area and found my quick link left on a route. claimed it back too, marking tape still in place too. But its now gone to some else now.
|
|
|
|
|
steple
Jun 23, 2009, 5:58 PM
Post #16 of 33
(27480 views)
Shortcut
Registered: Jul 11, 2008
Posts: 67
|
What you want is a maillon rapide. It's about 4 bucks. Better than a cheap biner because it's locking.
http://www.peguet.fr/fr/produits/normal.html
I got one at REI recently, but it's not listed on their site.
|
|
|
|
|
qtm
Jun 23, 2009, 6:07 PM
Post #17 of 33
(27469 views)
Shortcut
Registered: Apr 8, 2004
Posts: 548
|
Your "maillon rapide" is what we Americans call "quick links". You can buy them in any hardware store for about half the price of a new biner.
That said, buy a cheap biner as your bail biner. Buy used ones at swap meets. Don't use quicklinks for all the reasons mentioned above.
|
|
|
|
|
alleyehave
Jun 23, 2009, 6:16 PM
Post #18 of 33
(27455 views)
Shortcut
Registered: Nov 13, 2005
Posts: 461
|
It get's real expensive when you consider that theoretically you should leave two different bail biners on two different bolts...but that's a debate for another day
|
|
|
|
|
steple
Jun 23, 2009, 6:46 PM
Post #19 of 33
(27422 views)
Shortcut
Registered: Jul 11, 2008
Posts: 67
|
I don't see any safety problems with using a quick link / maillon rapide.
|
|
|
|
|
hafilax
Jun 23, 2009, 6:49 PM
Post #20 of 33
(27415 views)
Shortcut
Registered: Dec 12, 2007
Posts: 3025
|
steple wrote: I don't see any safety problems with using a quick link / maillon rapide.
|
|
|
|
|
jakedatc
Jun 23, 2009, 6:57 PM
Post #21 of 33
(27404 views)
Shortcut
Registered: Mar 12, 2003
Posts: 11054
|
personally i've never had an issue removing a quick link off a route. If it's on something hard for me then i clip the draw to the bolt and clean it on the way down. i have found 4 of them total. i keep one on my harness for the unexpected but have never had to use it since there are pretty easy ways to get up a sport route out here.
i'd like to see a picture of how having a biner next to a quick link on a bolt causes the biner to be loaded funny (like angry said)
I think the 2 biners.. 2 bolts thing is a bit overkill. if you're willing to whip on that bolt you should be ok lowering off it right? i also climb in a very heavily used area so any messed up bolts are quickly reported and fixed.
|
|
|
|
|
alleyehave
Jun 23, 2009, 7:22 PM
Post #22 of 33
(27378 views)
Shortcut
Registered: Nov 13, 2005
Posts: 461
|
jakedatc wrote: I think the 2 biners.. 2 bolts thing is a bit overkill. if you're willing to whip on that bolt you should be ok lowering off it right? i also climb in a very heavily used area so any messed up bolts are quickly reported and fixed.
Not saying I haven't done it, 90% of the time I bail on one biner/bolt, but your logic is flawed. The idea behind any rope system is that you have a backup. The exception being above your first piece of protection, in which case the anchor or worst case the ground is your next backup(hah!).
If i'm in a "modern" designated sport area(god I hope not), then I would bail off of one bolt/one biner(in good condition, obviously). But having to bail off of a single star-dryvin bolt is not my idea of a good time. It all reverts back to the segment of instruction that defeats most when approaching climbing concepts from a black/white perspective: common sense, or...the vague grey area. Use your head, the end.
|
|
|
|
|
steple
Jun 23, 2009, 8:52 PM
Post #23 of 33
(27340 views)
Shortcut
Registered: Jul 11, 2008
Posts: 67
|
hafilax wrote: steple wrote: I don't see any safety problems with using a quick link / maillon rapide. The suck for the next person on the climb especially the ones that aren't stainless steel and rust shut.
I came across a few and I never had a problem. But maybe I was just lucky :)
|
|
|
|
|
angry
Jun 23, 2009, 9:11 PM
Post #24 of 33
(27331 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
steple wrote: hafilax wrote: steple wrote: I don't see any safety problems with using a quick link / maillon rapide. The suck for the next person on the climb especially the ones that aren't stainless steel and rust shut. I came across a few and I never had a problem. But maybe I was just lucky :)
You're either not onsighting the route or you're ignorant of the forces that a quicklink between the rock and biner can cause. Unless the routes are dead easy, you aren't removing quicklink without hanging, even if it's not rusted shut.
|
|
|
|
|
steple
Jun 23, 2009, 10:17 PM
Post #25 of 33
(27302 views)
Shortcut
Registered: Jul 11, 2008
Posts: 67
|
angry wrote: steple wrote: hafilax wrote: steple wrote: I don't see any safety problems with using a quick link / maillon rapide. The suck for the next person on the climb especially the ones that aren't stainless steel and rust shut. I came across a few and I never had a problem. But maybe I was just lucky :) You're either not onsighting the route or you're ignorant of the forces that a quicklink between the rock and biner can cause. Unless the routes are dead easy, you aren't removing quicklink without hanging, even if it's not rusted shut.
If you just place your biner below the ql?
|
|
|
|
|
|
1
