|
dugl33
Aug 9, 2010, 5:01 PM
Post #1 of 140
(24267 views)
Shortcut
Registered: Oct 6, 2009
Posts: 740
|
I came across this pic on Mountain Project and thought it was curious enough to post. (Yosemite Valley, "Firefingers" 5.11b) Summary: Two bolt anchor. Bolts and anchor hardware look modern-beefy-bomber. One bolt is around 2 feet above the other. Anchor is tied with a single tied nylon runner which appears to be girth hitched to the lower bolts quicklink and redirected through a wiregate biner clipped to the top bolt hanger. The belayer is tied off with a clove hitch to a locker and the lead rope is clipped through a biner-on-biner on the top bolt. The new leader has clipped the first lead bolt with a quickdraw and the route is heading up and left. What do you think? **************** http://www.mountainproject.com/...118_large_95b99f.jpg
|
Attachments:
|
firefingers11b.jpg
(129 KB)
|
|
|
|
|
edge
Aug 9, 2010, 5:06 PM
Post #2 of 140
(24254 views)
Shortcut
Registered: Apr 14, 2003
Posts: 9120
|
Umm, yeah. I would have handled that scenario differently.
|
|
|
|
|
jakedatc
Aug 9, 2010, 5:13 PM
Post #3 of 140
(24241 views)
Shortcut
Registered: Mar 12, 2003
Posts: 11054
|
when trad climbers encounter bolts and get confused?
|
|
|
|
|
taydude
Aug 9, 2010, 5:18 PM
Post #4 of 140
(24228 views)
Shortcut
Registered: May 25, 2006
Posts: 531
|
depending on gear I would have just made a typical anchor with two legs out of cordalette or webbing. Or if we were swapping leads I probably would have just tied cloved the rope to a locker on each bolt. Then again I'm a noob and likely to kill myself.
|
|
|
|
|
billcoe_
Aug 9, 2010, 6:01 PM
Post #6 of 140
(24160 views)
Shortcut
Registered: Jun 30, 2002
Posts: 4694
|
He could have just as easily clipped the chain, cloved that biner, and ran the rope up to the next bolt and cloved that biner. I can't say why some people do the things they do. One time I was doing Regular NW face of Half dome with my AMGA certified partner, and he set up the rope similar so that the high piece had the rope going up to it instead of the reverse -just like this essentially, with the backup pieces below. At that point we'd been climbing together for probably over 20 years with no similar instances, guy was always near perfect. Furthermore, he'd fiddled with the anchor a longer than normal time as well. He had no explanation to offer when I spit out my exasperation upon seeing that abortion of an anchor.....so we let it be and moved on. Shit happens.
|
|
|
|
|
billcoe_
Aug 9, 2010, 6:03 PM
Post #7 of 140
(24159 views)
Shortcut
Registered: Jun 30, 2002
Posts: 4694
|
Oh yeah, BTW: it's adequate and will work, but as this probably cost more time than the 2 cloves in line - totally stupid and incorrect. Shit happens.
|
|
|
|
|
styndall
Aug 9, 2010, 6:13 PM
Post #8 of 140
(24140 views)
Shortcut
Registered: May 29, 2002
Posts: 2741
|
That anchor is weird as hell.
|
|
|
|
|
majid_sabet
Aug 9, 2010, 6:13 PM
Post #9 of 140
(24139 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
never leave all of your eggs in one basket if you got the gear then set a typical anchor instead of "single tied nylon runner which appears to be girth hitched"
|
|
|
|
|
welle
Aug 9, 2010, 7:06 PM
Post #10 of 140
(24092 views)
Shortcut
Registered: Aug 8, 2008
Posts: 212
|
Isn't it called "American Death Triangle"?
|
|
|
|
|
bill413
Aug 9, 2010, 7:17 PM
Post #11 of 140
(24079 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
welle wrote: Isn't it called "American Death Triangle"? No.
|
|
|
|
|
styndall
Aug 9, 2010, 7:18 PM
Post #12 of 140
(24076 views)
Shortcut
Registered: May 29, 2002
Posts: 2741
|
welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts.
|
|
|
|
|
marc801
Aug 9, 2010, 7:23 PM
Post #13 of 140
(24065 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. ADT on the left. Correct rigging on the right.
|
|
|
|
|
welle
Aug 9, 2010, 7:25 PM
Post #14 of 140
(24064 views)
Shortcut
Registered: Aug 8, 2008
Posts: 212
|
styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. Can't tell from the angle of the photo, but does it have to be parallel points? It has two main attributes of the ADT - reliance on a single sling and extension of of the anchor (if one point fails, the forces on the remaining point will be tremendous).
|
|
|
|
|
caughtinside
Aug 9, 2010, 7:33 PM
Post #15 of 140
(24049 views)
Shortcut
Registered: Jan 8, 2003
Posts: 30603
|
welle wrote: styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. Can't tell from the angle of the photo, but does it have to be parallel points? It has two main attributes of the ADT - reliance on a single sling and extension of of the anchor (if one point fails, the forces on the remaining point will be tremendous). That isnt'a triangle. It's a V. The issue with the ADT is that it increases forces on the bolts. Here, there is no triangle. There is no force amplification. There's also no equalization. It's basically a belay off one bolt with the second bolt as a backup. There's two 'legs' on that sling, but one of them is the attachment to the photographer, so that's not an equalization leg. It's hard to say why it's set up that way, perhaps there is a belay stance? But then the bolt position wouldn't make sense. I'd probably try to sling the two bolts together and then hang on the lower one, sort of ghetto equalized.
|
|
|
|
|
redlude97
Aug 9, 2010, 7:56 PM
Post #16 of 140
(24011 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
caughtinside wrote: welle wrote: styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. Can't tell from the angle of the photo, but does it have to be parallel points? It has two main attributes of the ADT - reliance on a single sling and extension of of the anchor (if one point fails, the forces on the remaining point will be tremendous). That isnt'a triangle. It's a V. The issue with the ADT is that it increases forces on the bolts. Here, there is no triangle. There is no force amplification. There's also no equalization. It's basically a belay off one bolt with the second bolt as a backup. There's two 'legs' on that sling, but one of them is the attachment to the photographer, so that's not an equalization leg. It's hard to say why it's set up that way, perhaps there is a belay stance? But then the bolt position wouldn't make sense. I'd probably try to sling the two bolts together and then hang on the lower one, sort of ghetto equalized. I dunno, it kinda looks like a triangle to me
(This post was edited by redlude97 on Aug 9, 2010, 7:57 PM)
|
Attachments:
|
ADT.JPG
(7.39 KB)
|
|
|
|
|
caughtinside
Aug 9, 2010, 8:08 PM
Post #17 of 140
(23993 views)
Shortcut
Registered: Jan 8, 2003
Posts: 30603
|
redlude97 wrote: caughtinside wrote: welle wrote: styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. Can't tell from the angle of the photo, but does it have to be parallel points? It has two main attributes of the ADT - reliance on a single sling and extension of of the anchor (if one point fails, the forces on the remaining point will be tremendous). That isnt'a triangle. It's a V. The issue with the ADT is that it increases forces on the bolts. Here, there is no triangle. There is no force amplification. There's also no equalization. It's basically a belay off one bolt with the second bolt as a backup. There's two 'legs' on that sling, but one of them is the attachment to the photographer, so that's not an equalization leg. It's hard to say why it's set up that way, perhaps there is a belay stance? But then the bolt position wouldn't make sense. I'd probably try to sling the two bolts together and then hang on the lower one, sort of ghetto equalized. I dunno, it kinda looks like a triangle to me I stand corrected. I took another look and it likely is a triangle. I didn't realize that runner went from the lower bolt to the locker with the clove. hard to see.
|
|
|
|
|
jrathfon
Aug 9, 2010, 8:08 PM
Post #18 of 140
(23990 views)
Shortcut
Registered: Jun 5, 2006
Posts: 494
|
redlude97 wrote: caughtinside wrote: welle wrote: styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. Can't tell from the angle of the photo, but does it have to be parallel points? It has two main attributes of the ADT - reliance on a single sling and extension of of the anchor (if one point fails, the forces on the remaining point will be tremendous). That isnt'a triangle. It's a V. The issue with the ADT is that it increases forces on the bolts. Here, there is no triangle. There is no force amplification. There's also no equalization. It's basically a belay off one bolt with the second bolt as a backup. There's two 'legs' on that sling, but one of them is the attachment to the photographer, so that's not an equalization leg. It's hard to say why it's set up that way, perhaps there is a belay stance? But then the bolt position wouldn't make sense. I'd probably try to sling the two bolts together and then hang on the lower one, sort of ghetto equalized. I dunno, it kinda looks like a triangle to me [image]http://www.rockclimbing.com/cgi-bin/forum/gforum.cgi?do=post_attachment;postatt_id=5176;[/image] redlude's got the setup correct. but because these anchors are more vertical in nature forces aren't going to amplify as drastically as in the ADT. i just thought the quote "modern gear" was quite funny... with the rigid friend hanging from his waist.
|
|
|
|
|
majid_sabet
Aug 9, 2010, 8:35 PM
Post #20 of 140
(23950 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
marc801 wrote: styndall wrote: welle wrote: Isn't it called "American Death Triangle"? Nope. I'm pretty sure the ADT is a single sling between two (mostly-)parallel bolts. ADT on the left. Correct rigging on the right. [image]http://www.climbing.com/print/techtips/Trad.224-1.gif[/image] both wrong never tie webbing directly on hangers
|
|
|
|
|
marc801
Aug 9, 2010, 9:03 PM
Post #21 of 140
(23915 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
majid_sabet wrote: both wrong never tie webbing directly on hangers I thought by now you'd have learned... it depends - on the hangers, the webbing, and the situation (eg: rap vs belay anchor, temporary or semi-permanent, etc.). If I'm doing a dozen raps off of GPA and the bolt anchors don't have chains or quick links (many don't), you can be damned sure me or any other climber is not leaving a pair of biners at each station, nor are we carrying twenty or more quick links. We're tying or girth hitching webbing to the hangers, as has been done for the last half century.
|
|
|
|
|
marc801
Aug 9, 2010, 9:08 PM
Post #22 of 140
(23908 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
caughtinside wrote: I stand corrected. I took another look and it likely is a triangle. I didn't realize that runner went from the lower bolt to the locker with the clove. hard to see. Just because it has a triangular component doesn't necessarily mean it's an ADT. As pointed out earlier, the key aspect of the ADT is the force multiplication and, secondarily, the lack of redundancy if constructed of a single piece of webbing.
|
|
|
|
|
j_ung
Aug 9, 2010, 10:35 PM
Post #23 of 140
(23851 views)
Shortcut
Registered: Nov 21, 2003
Posts: 18690
|
marc801 wrote: caughtinside wrote: I stand corrected. I took another look and it likely is a triangle. I didn't realize that runner went from the lower bolt to the locker with the clove. hard to see. Just because it has a triangular component doesn't necessarily mean it's an ADT. As pointed out earlier, the key aspect of the ADT is the force multiplication and, secondarily, the lack of redundancy if constructed of a single piece of webbing. Which is exactly what I see in the picture. Plus teeny little nubs for tails. I assume these guys made it out alive, but if I climbed up to find that's what my partner built, I'd slap him in the back of the head and re-rig it before leading on (and it would take all of 30 seconds). Granted it's a slab and the leader clipped the high bolt, so bombing onto the anchor isn't likely to happen, but let's say it's a different situation. Factor 2 one of those and the safety of the entire team is not a foregone conclusion. If the supertape is old and perma-tied into a sling, it's like showing up an hour late and giftless for your date with death. Maybe death let's you kiss her, or maybe she's not that easy. Who can say?
|
|
|
|
|
marc801
Aug 9, 2010, 10:48 PM
Post #24 of 140
(23840 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
j_ung wrote: I assume these guys made it out alive, but if I climbed up to find that's what my partner built, I'd slap him in the back of the head and re-rig it before leading on (and it would take all of 30 seconds). Granted it's a slab and the leader clipped the high bolt, so bombing onto the anchor isn't likely to happen, but let's say it's a different situation. Factor 2 one of those and the safety of the entire team is not a foregone conclusion. Even a slab/friction climb can have unexpected forces. There's a route on GPA posthumously named Anchors Away....
|
|
|
|
|
j_ung
Aug 9, 2010, 10:54 PM
Post #25 of 140
(23835 views)
Shortcut
Registered: Nov 21, 2003
Posts: 18690
|
marc801 wrote: j_ung wrote: I assume these guys made it out alive, but if I climbed up to find that's what my partner built, I'd slap him in the back of the head and re-rig it before leading on (and it would take all of 30 seconds). Granted it's a slab and the leader clipped the high bolt, so bombing onto the anchor isn't likely to happen, but let's say it's a different situation. Factor 2 one of those and the safety of the entire team is not a foregone conclusion. Even a slab/friction climb can have unexpected forces. There's a route on GPA posthumously named Anchors Away.... Good point... good point.
|
|
|
|
|
|