|
MangoMatto
Mar 15, 2013, 12:51 AM
Post #1 of 10
(4841 views)
Shortcut
Registered: Jan 26, 2013
Posts: 4
|
I want to build a four sided tower similar to what would be found in a gym. I am planning on building a metal structure and build off of that. I am not sure what the internal stucture of the climbing walls look like and was hoping maybe you could help me. By the way I run a fabrication shop and I want my wall to be as close to commercial standards as possible. Thanks
|
|
|
|
|
acorneau
Mar 15, 2013, 1:28 AM
Post #2 of 10
(4823 views)
Shortcut
Registered: Feb 6, 2008
Posts: 2889
|
MangoMatto wrote: I want to build a four sided tower similar to what would be found in a gym. I am planning on building a metal structure and build off of that. I am not sure what the internal stucture of the climbing walls look like and was hoping maybe you could help me. By the way I run a fabrication shop and I want my wall to be as close to commercial standards as possible. Thanks Outside/inside? Free-standing/attached to an existing roof? Wood/concrete/fiberglass surface? Lots of variables there. I suggest consulting with a reputable wall-builder and/or a certified structural engineer first.
|
|
|
|
|
MangoMatto
Mar 15, 2013, 2:44 AM
Post #3 of 10
(4806 views)
Shortcut
Registered: Jan 26, 2013
Posts: 4
|
It will be outside free standing approx. 30' tall. I have access to engineers, but I guess my biggest question is pertaining to how the holds are attached. Texas rock gym has a cement like surface with nuts built in. I am trying to figure out if there is a rebar skeleton with gunite sprayed over it, if so how are the nuts secured? I'm not even certain that it's gunite. Just trying to get some of those types of details figured out before I get one of my engineer buddies to help me.
|
|
|
|
|
shotwell
Mar 15, 2013, 3:40 AM
Post #4 of 10
(4780 views)
Shortcut
Registered: Jan 6, 2009
Posts: 366
|
MangoMatto wrote: It will be outside free standing approx. 30' tall. I have access to engineers, but I guess my biggest question is pertaining to how the holds are attached. Texas rock gym has a cement like surface with nuts built in. I am trying to figure out if there is a rebar skeleton with gunite sprayed over it, if so how are the nuts secured? I'm not even certain that it's gunite. Just trying to get some of those types of details figured out before I get one of my engineer buddies to help me. I would ask to peek behind the walls at the gym you mentioned. You're not quite on the right track at the moment. The structure is typically angle iron and plywood. The nuts are called t-nuts and pounded or screwed into the plywood. Surfaces can be lath and concrete, epoxy based textures, or simple textured paint Building it right definitely requires an engineer's assistance, especially for the anchoring points. To be totally real with you, this is a damn big project. If you're doing this with the intention of having anything than some giant monstrosity for your personal use, I would strongly suggest you work with an established gym builder.
|
|
|
|
|
MangoMatto
Mar 15, 2013, 11:01 AM
Post #5 of 10
(4730 views)
Shortcut
Registered: Jan 26, 2013
Posts: 4
|
So its angle iron with plywood and t-nuts that gets stucco over it? I'm going this weekend I'll see if they will let me take a peek. The engineering side for me is the easy part I run a shop that builds structures that can hold upto 20k lbs. I have seen the plywood and t-nuts I guess I was just over thinking this project. Thanks for your help with this.
|
|
|
|
|
acorneau
Mar 15, 2013, 12:55 PM
Post #6 of 10
(4705 views)
Shortcut
Registered: Feb 6, 2008
Posts: 2889
|
Our gym was built with square tubular steel for the super-structure; angle iron-framed plywood panels welded to each other and to the super-structure with more angle iron; wire lath layered over the plywood then sprayed with gunite. Many outdoor climbing towers are made with telephone poles and 2x12's, but you would need to look to the "challenge course" industry for those types of building spec's.
|
|
|
|
|
MangoMatto
Mar 15, 2013, 2:12 PM
Post #7 of 10
(4653 views)
Shortcut
Registered: Jan 26, 2013
Posts: 4
|
Definitely not into the challenge course. Allen is there any chace you would be willing to give me a" behind the scenes look. Ill be out there on Sunday?
|
|
|
|
|
acorneau
Mar 15, 2013, 6:15 PM
Post #8 of 10
(4600 views)
Shortcut
Registered: Feb 6, 2008
Posts: 2889
|
PM sent.
|
|
|
|
|
doktor_g
Mar 16, 2013, 4:36 PM
Post #9 of 10
(4494 views)
Shortcut
Registered: Oct 14, 2003
Posts: 152
|
http://www.rockclimbing.com/photos/Indoor/My_home_gym_plan_103324.html My internal structure of a space saving garage woodie. Best suggestion is DONT go too overhung. Bad for feet training IMHO. DrG
|
|
|
|
|
camhead
Mar 16, 2013, 4:41 PM
Post #10 of 10
(4492 views)
Shortcut
Registered: Sep 10, 2001
Posts: 20939
|
doktor_g wrote: http://www.rockclimbing.com/photos/Indoor/My_home_gym_plan_103324.html My internal structure of a space saving garage woodie. Best suggestion is DONT go too overhung. Bad for feet training IMHO. DrG That plan really has nothing to do with what the OP wants to do, and for a tower, it would pretty much be impossible for him to get too overhung. Also, I would respectfully disagree with you about "don't get too overhung" for a garage woodie, but that's a conversation for another thread.
|
|
|
|
|
|