|
donald949
Apr 19, 2013, 6:08 PM
Post #26 of 38
(2745 views)
Shortcut
Registered: May 24, 2007
Posts: 11455
|
link a picture the same way you linked the youtube viddy. except use "image" and "/image" tags instead of "url" Now regarding the belaying... Are you saying she was using the palms up or the palms down method. Because if done properly, brake hand stay on the rope and thumb wraps around the fingers, both are acceptable. From me you're getting a palms up, and I promise to keep my brake hand on the rope. I even got an origonal Lowe Tuber or two I can give you one with. Although when the trango pyramid came out, I grabbed one of those in a hot second. Never liked a fig 8, put too much twist in the rope and the body belay turned my shirts black, but you ask nice I'll give one anyway. Don
|
|
|
|
|
Gdog42
Apr 19, 2013, 8:08 PM
Post #27 of 38
(2710 views)
Shortcut
Registered: Apr 18, 2013
Posts: 30
|
Ok, here we go! Thanks for the help guys! So, like I said this is exactly how she was positioned for the entire climb, using a ATC belay device with the climber on a toprope. I know I wouldn't trust anyone who belays like this with an ATC on a toprope. Maybe the guy she was belaying was the one who taught her since he was fine about it? ^ How not to belay. (there wasn't anyone on the other end of this rope when this picture was taken) This should clear things up for anyone who might have misunderstood what I was trying to describe (I wouldn't blame you- it's kind of complicated to explain!) Anyway, the point of this thread was to say that belaying like this with this setup isn't really a good idea.
(This post was edited by Gdog42 on Apr 19, 2013, 8:13 PM)
|
|
|
|
|
redlude97
Apr 19, 2013, 8:14 PM
Post #28 of 38
(2700 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
Gdog42 wrote: Ok, here we go! Thanks for the help guys! So, like I said this is exactly how she was positioned for the entire climb, using a ATC belay device with the climber on a toprope. I know I wouldn't trust anyone who belays like this with an ATC on a toprope. Maybe the guy she was belaying was the one who taught her since he was fine about it? [image]https://lh5.googleusercontent.com/-J-yhU3r0UnQ/UXCq484BP_I/AAAAAAAAAGg/Q3DM3VZoMU0/s668/IMAG0058.JPG[/image] ^ How not to belay. (there wasn't anyone on the other end of this rope when this picture was taken) This should clear things up for anyone who might have misunderstood what I was trying to describe (I wouldn't blame you- it's kind of complicated to explain!) Anyway, the point of this thread was to say that belaying like this with this setup isn't really a good idea. Exactly as I suspected. You're a fucking noob.
|
|
|
|
|
csproul
Apr 19, 2013, 8:16 PM
Post #29 of 38
(2699 views)
Shortcut
Registered: Jun 4, 2004
Posts: 1769
|
Gdog42 wrote: Ok, here we go! Thanks for the help guys! So, like I said this is exactly how she was positioned for the entire climb, using a ATC belay device with the climber on a toprope. I know I wouldn't trust anyone who belays like this with an ATC on a toprope. Maybe the guy she was belaying was the one who taught her since he was fine about it? [image]https://lh5.googleusercontent.com/-J-yhU3r0UnQ/UXCq484BP_I/AAAAAAAAAGg/Q3DM3VZoMU0/s668/IMAG0058.JPG[/image] ^ How not to belay. (there wasn't anyone on the other end of this rope when this picture was taken) This should clear things up for anyone who might have misunderstood what I was trying to describe (I wouldn't blame you anyway- it's kind of complicated to explain!) Anyway, the point of this thread was to say that belaying like this with this setup isn't really a good idea. Yawn. In and of itself, not really dangerous. I wouldn't want an inexperienced belayer doing this with me, but for somebody who knows what they are doing, it's fine. Are you sure which category you fall into? Are you sure you can tell the difference? Letting go of the brake-hand...now that's a different matter.
|
|
|
|
|
budman
Apr 19, 2013, 8:21 PM
Post #30 of 38
(2695 views)
Shortcut
Registered: Nov 10, 2004
Posts: 170
|
That is the way I was taught to belay before the stitch plate was invented and you were doing the hip belay. Things haven't changed much since then except people don't know the origins or the reasons why. As long as she did not let the rope go with the right hand and was ready to catch a fall by throwing the right hand down by her side to arrest the fall I'd have her on my other end of the rope anytime. Oh yeh that thingy your biner is attached to wasn't present on the first sewn harnesses.
|
|
|
|
|
Gdog42
Apr 19, 2013, 8:53 PM
Post #31 of 38
(2680 views)
Shortcut
Registered: Apr 18, 2013
Posts: 30
|
You can't always rely on the thought that you're " ready to catch a fall by throwing the right hand down". True, with most climbers I've belayed I can see what they're doing and can predict what's going to happen. However, that's not always how it is. I can understand this if they're moving and you have no choice but to raise the lower hand, but if they're not moving it's best to keep it locked. If you think that this is a safe way of belaying, that's fine. I've just been unaware of it and have only seen this person belaying like this with an ATC. Everyone else I've ever seen, except some of those who new to belaying, have always kept the rope locked when the climber is stationary. I guess people are more commonly being taught like that now. The reason I was thinking that this was an unsafe method (and still do) is because the belayer can't guarantee that they will always lock the rope when the climber falls; whereas if it's already locked when there climber isn't moving they don't have to. In my opinion it's best to be safe than sorry. Thanks budman for explaining why some climbers do this.
(This post was edited by Gdog42 on Apr 19, 2013, 8:57 PM)
|
|
|
|
|
jktinst
Apr 20, 2013, 12:33 PM
Post #32 of 38
(2629 views)
Shortcut
Registered: Jun 29, 2010
Posts: 89
|
qwert wrote: ...fun fact: The Austrian alpine clubs official way of teaching the munter hitch is to operate it with the brake hand below the device (just like one would do with an ATC), in order to avoid the scenario described above. qwert Wow! Munter belaying with brake hand down, eh ? There are 4 ways to loop the rope for a Munter, times 2 ways to clip the biner equals 8 possible combinations. When Munter belaying with hands side-by-side, it doesn't matter one bit whichever way you end up with but if you're going to belay with brake hand down, only one of these 8 combinations will allow you to belay in a way that 1) places the Munter’s brake strand on the side of your habitual ATC brake hand, 2) allows you to increase friction/braking by keeping that hand outward and down as with an ATC (as opposed to seriously decreasing braking when doing so), and 3) will not risk forcing the brake strand to drag over the biner's gate. In addition, that only works if you only take in the rope or only pay it out. The second you have to flip the hitch around to go from one to the other (eg lowering after a toprope climb), not only does the brake strand switches around side-to-side, but maintaining friction in the down position now requires the belayer to pull towards himself instead of outward (which kills all pretense of mimicking the ATC), potentially dragging the brake strand over the gate and, for a bonus feature, in a way that any feeding of the rope in that configuration will unscrew the gate!! By comparison, when Munter belaying with hands side-by-side, not only can you make the hitch and clip it whichever way you want. You can also flip it around as often as you want without ever changing hand positions, keeping the same amount of friction on the brake strand at all times (unless you intentionally want to decrease it) and keeping it well-away from the gate. I find the Munter most useful to bring up a second. Unlike the ATC Guide or Reverso in guide mode, it allows you to give a tight rope if your second needs it and to lower him (or give him slack) easily, even if he is hanging. Like the ATC in guide mode, it lets you belay with both hands side-by-side, which is more comfortable and practical for the leader than hands pointing in opposite directions. So it does not allow one-handed belaying of the second. So what. I can certainly live with this minor "inconvenience" given all the other advantages. I learned climbing in France in the early 80s and started on multipitch trad pretty much right from the start (seconding for the first few times and starting to lead easy stuff soon after). I used the Munter for all my belaying needs for my first 10 years of on-again-off-again climbing and have continued using it to bring up seconds after I started using tubular devices. Despite all the comments I’ve seen about the Munter twisting the rope, my experience has been that a few ropes twist a fair bit but most twist only a little if at all. My current Edelrid 10.5 mm twists big time just top-roping at the gym with ATC-type devices but does not twist at all bringing up a second with the Munter. Go figure. (edited for correct terminololgy: hitch inst. of knot, etc.)
(This post was edited by jktinst on Apr 20, 2013, 8:51 PM)
|
|
|
|
|
shockabuku
Apr 20, 2013, 5:02 PM
Post #33 of 38
(2601 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
Gdog42 wrote: You can't always rely on the thought that you're " ready to catch a fall by throwing the right hand down". True, with most climbers I've belayed I can see what they're doing and can predict what's going to happen. However, that's not always how it is. I can understand this if they're moving and you have no choice but to raise the lower hand, but if they're not moving it's best to keep it locked. If you think that this is a safe way of belaying, that's fine. I've just been unaware of it and have only seen this person belaying like this with an ATC. Everyone else I've ever seen, except some of those who new to belaying, have always kept the rope locked when the climber is stationary. I guess people are more commonly being taught like that now. The reason I was thinking that this was an unsafe method (and still do) is because the belayer can't guarantee that they will always lock the rope when the climber falls; whereas if it's already locked when there climber isn't moving they don't have to. In my opinion it's best to be safe than sorry. Thanks budman for explaining why some climbers do this. Nothing wrong with the method for sport climbing where you can see your climber but it does require you to be attentive and react appropriately. Of course, your belayer should do that anyway. I belay like that for TR because I find it much easier and on TR I don't have to worry about my climber free-falling before the rope comes tight. Perhaps when you have more experience you'll develop a different opinion about it.
|
|
|
|
|
Gdog42
Apr 20, 2013, 5:36 PM
Post #34 of 38
(2591 views)
Shortcut
Registered: Apr 18, 2013
Posts: 30
|
shockabuku wrote: Nothing wrong with the method for sport climbing where you can see your climber but it does require you to be attentive and react appropriately. Of course, your belayer should do that anyway. I belay like that for TR because I find it much easier and on TR I don't have to worry about my climber free-falling before the rope comes tight. Perhaps when you have more experience you'll develop a different opinion about it. Yes, you're completely right about this being ok for sport climbing, in which you have to pay out constant slack to the climber (unless he/she clips into a draw and then asks me to take in slack for whatever reason) Last week my friend was leading a rope and I was belaying him, and I was using this method for that. My complaint was that she was belaying a top roper like this with an ATC. She could have at least locked the rope when possible. It might be because I'm from the UK and there, most people are taught to belay with ATCs so that the rope is always locked off between movements. Because of this I honestly never saw anyone else there belay like this on a top rope without a self-locking device. I only just started climbing in the US last year, so when I went out and saw this I guess it was a bit of a surprise. What also surprised me (when I was at Red River, KY earlier last year) was how I didn't see anyone using an autoblock when abseiling down 60+ft routes when cleaning the anchors. Most European climbers always do this. I don't know if this is also common practice in the US, but I'm glad I found out I was just over-reacting about this because I might have asked about lacking an autoblock on this forum, too. Same goes with Figure 8 devices; so far I haven't seen anyone here using them, but I prefer the ATCs anyway! Oh well, looks like I'll just have to get more used to American climbing customs. Sorry about this, people. I suppose making myself look kind of daft wasn't exactly the best way to start my first thread on this forum, but sometimes that's just the way things are. If I could I'd give you all free bacon for accidentally wasting your time!
(This post was edited by Gdog42 on Apr 20, 2013, 5:40 PM)
|
|
|
|
|
6pacfershur
Apr 20, 2013, 9:42 PM
Post #35 of 38
(2561 views)
Shortcut
Registered: Jun 23, 2010
Posts: 254
|
Gdog42 wrote: If I could I'd give you all free bacon for accidentally wasting your time! that just might persuade kartessa to not slap your grigri or cut your rope....
|
|
|
|
|
rgold
Apr 22, 2013, 12:54 PM
Post #36 of 38
(2469 views)
Shortcut
Registered: Dec 3, 2002
Posts: 1804
|
The palm-up hand position is a much more effective way to pump slack to a leader who is clipping. The palm-down method is not as fast, and at least in my experience, even the best belayers sometimes lock up their devices when pumping slack palms down, short-roping the leader at a critical moment. When using half-ropes, the palm-up position is far better for managing two strands. The palm-up position is the appropriate position for belaying with a Munter hitch. Dropping the brake hand means losing a significant amount of friction, negating one of the advantages of the hitch. There is no reason why the device can't be kept locked off when the leader isn't moving, regardless of palm position. As for the belayer reacting to a fall, it is only in the modern era of distracted and complacent belaying that this had become an issue. The belayer is supposed to be giving full attention to the leader. If they are, there is no problem with dropping the hand to catch a fall. The trouble with palm-up belaying is that the belayer cannot grip as hard and might have trouble holding a big fall. I know some people who burned their hands on big falls held palm up and switched to palm-down as a result. I think this is a real issue and is the primary reason for palm-down belaying. My observation is that palm-down belaying seems to encourage a brake hand position barely below and almost touching the device. This is not at all optimal; there is the risk of pinching skin and, more critically, the inertial phase of a big-fall catch is entirely eliminated, making it more likely that rope will run if the belay load is high. I think the solution to all these issues is an assisted-locking device. The Mammut Smart, the Alpine Up, and the Edelrid Mega Jul are the current contenders. Of these, I think the Alpine Up is best suited belaying palm-up, especially with half-ropes, but the technology is developing rapidly, and there will probably be new devices and improvements on the existing devices. ATC-style devices are, I think, headed for extinction.
|
|
|
|
|
rgold
Apr 22, 2013, 1:38 PM
Post #38 of 38
(2448 views)
Shortcut
Registered: Dec 3, 2002
Posts: 1804
|
This is the second time I'm hearing this, the first time being when devices replaced the hip belay. And indeed, few people, mostly those who do a lot of alpine climbing, have any idea about how to set up a properly braced stance. Don't get me wrong, I don't disagree with you, but it does seem that basic belaying skills are headed for extinction as it is.
|
|
|
|
|
|