|
funoutside
Feb 26, 2003, 1:26 AM
Post #1 of 11
(2260 views)
Shortcut
Registered: Feb 12, 2003
Posts: 23
|
I have heard about people ascending up ropes that are stuck at the top of the climb after trying to pull the rope. Can anyone please clerify what is going on here. I mean people are not ascending ropes that are stuck and not tied I would hope. Say you have only a single rope and it gets stuck on a multi pitch while rapping down, what do you do? Not that this would happen to me unless something crazey happend, I usually carry two. Just wondering on the situation.
|
|
|
|
|
mapman
Feb 26, 2003, 1:54 AM
Post #2 of 11
(2260 views)
Shortcut
Registered: Jan 31, 2003
Posts: 13
|
Pull, pull, pull, and if that doesn't work you are going back up... http://www.climbing.com/Pages/Techtip_pages/194/techtips194-trad.html http://www.climbing.com/Pages/Techtip_pages/195/techtip195_trad.html
|
|
|
|
|
mauriceb
Feb 26, 2003, 2:36 AM
Post #3 of 11
(2260 views)
Shortcut
Registered: Mar 24, 2002
Posts: 247
|
Mapman - Thanks for the links. I only have one question - In the second article it suggests tying off a damaged section of rope with an overhand then placing knot against rappell ring and rapping other line. If you've matched both ends of the rope before running them thru the rings, why wouldn't you rap both lines and then pull the side with the knot? maurice
|
|
|
|
|
apollodorus
Feb 26, 2003, 2:50 AM
Post #4 of 11
(2260 views)
Shortcut
Registered: Feb 18, 2002
Posts: 2157
|
If you have to go back up to retrieve a stuck rap rope, do it as if you were roped soloing. Tie the bottom off to a BOMBER anchor, and put a directional up above that, if you can. Tie overhand knots as you go, and keep at least one clipped to you with two lockers at all times. That way, if the rope does pull free, you're only going to take a leader fall. Putting pro in as you go is not a bad idea, either. You can retrieve it as you rap back down.
|
|
|
|
|
talons05
Feb 26, 2003, 3:01 AM
Post #5 of 11
(2260 views)
Shortcut
Registered: Aug 23, 2001
Posts: 1435
|
The only truly safe way to do it, as appolodorus hinted at, is to - in effect - RE-LEAD the section back to the rap anchors! Though you will be using ascenders to move more quickly, I recommend placing gear as if you were back on lead... A.W.
|
|
|
|
|
arlen
Feb 26, 2003, 6:35 AM
Post #6 of 11
(2260 views)
Shortcut
Registered: May 3, 2001
Posts: 127
|
It happened to me once. The blame falls evenly on my partner and me: he didn't trust the 5 or so slings that were already present (not a bad decision), but the new sling he tied pulled the rap ring about 1.5" back over the lip of the ledge. He went first, then I threaded my ATC so that the ropes crossed over.:oops: It was an awkward stance even for a right-handed rap, and I'm left-handed, but there's no excuse. I got to the bottom, the rope got stuck, and we were preparing to gear lead up the side we had in our hands, when a free soloer crawled onto our ledge and sunnily offered to free our rope. :o Moral: don't cross the fricken ropes. Lesson: you'll do it sooner or later, so have a plan and the gear to do it. Arlen
|
|
|
|
|
mauriceb
Feb 26, 2003, 10:52 PM
Post #7 of 11
(2260 views)
Shortcut
Registered: Mar 24, 2002
Posts: 247
|
For those who checked out the links above I have a question. In the second article it details what to do if the rope is damaged during retrival. It suggests tying off a damaged section of rope with an overhand then placing knot against rappell ring and rapping other line. If you've matched both ends of the rope before running them thru the rings, why wouldn't you rap normally (both lines) and then pull the side with the knot? http://www.climbing.com/Pages/Techtip_pages/195/techtip195_trad.html maurice
|
|
|
|
|
sspssp
Feb 26, 2003, 10:59 PM
Post #8 of 11
(2260 views)
Shortcut
Registered: Jan 2, 2003
Posts: 1731
|
I didn't read the link, but if you've tied off a damaged portion of the rope, and you rapped both lines, you would have to pass the knot. It can be done, but it is a pain and would slow you down. So, just rap the good side.
|
|
|
|
|
apollodorus
Feb 26, 2003, 11:35 PM
Post #9 of 11
(2260 views)
Shortcut
Registered: Feb 18, 2002
Posts: 2157
|
If you use ascenders to go back up the rope, you MUST tie overhand knots and clip in to them. If the top of the rope pulls, your ascenders will be pointing down when the rope goes tight against the lower anchor. In other words, you'd be jugging right off the end of the rope at top speed.
|
|
|
|
|
ride
Feb 27, 2003, 7:13 PM
Post #10 of 11
(2260 views)
Shortcut
Registered: Aug 16, 2002
Posts: 216
|
In reply to: If you have to go back up to retrieve a stuck rap rope, do it as if you were roped soloing. Yep, happened to me while I was rope-soloing Sespe (Black Wall) in Ojai. The end of rope had miraculously tied itself into a big 'ole knot (it was quite amazing actually, never had that happen before or since, I *could've* forgotten something, I guess), which got stuck in the rings. luckily I had the Soloist already with me, and was smart enough to do exactly what Apollodorus mentioned.
|
|
|
|
|
dig_scott
Mar 3, 2003, 8:07 PM
Post #11 of 11
(2260 views)
Shortcut
Registered: Aug 30, 2002
Posts: 303
|
i have pulled a rope on sport with the 8 still tied. dont know why. lucky for me we had two ropes and i relead the pitch but was to burned out from climbing that day that i couldnt clip the last bolt so i accended the last bit. i have also pulled the rope and had a knot tie in the end. i know i didnt forget this time cause i saw the knot form. i think i pulled it too fast and the end was flapping around.
|
|
|
|
|
|