|
pedro_sandchez
Feb 23, 2009, 12:43 AM
Post #1 of 66
(6199 views)
Shortcut
Registered: Oct 30, 2007
Posts: 31
|
So this weekend I dropped my petzl reverso and attache about 60ish feet. Not sure how it happened, I'm guessing part of my shirt got caught in the gate when I clipped it to my harness because when I reached up to unlock a different biner, i heard it unclip and fall. Bassically, it slid down a slabby face and then dropped off the vertical face. My partner down below saw it happen and tried to catch it. It bounced off of his palm and landed in the dirt at his feet. It didn't land directly on rock or anything just in the dirt. I am convinced it is totally safe in that it didn't impact any rock at the base of the climb. My partner on the other hand is skeptical. I just wanted to get some other opinions. Thanks
|
|
|
|
|
altelis
Feb 23, 2009, 12:46 AM
Post #2 of 66
(6194 views)
Shortcut
Registered: Nov 10, 2004
Posts: 2168
|
pedro_sandchez wrote: So this weekend I dropped my petzl reverso and attache about 60ish feet. Not sure how it happened, I'm guessing part of my shirt got caught in the gate when I clipped it to my harness because when I reached up to unlock a different biner, i heard it unclip and fall. Bassically, it slid down a slabby face and then dropped off the vertical face. My partner down below saw it happen and tried to catch it. It bounced off of his palm and landed in the dirt at his feet. It didn't land directly on rock or anything just in the dirt. I am convinced it is totally safe in that it didn't impact any rock at the base of the climb. My partner on the other hand is skeptical. I just wanted to get some other opinions. Thanks hmmmm. yawn. its safe. move on. or maybe the right response is beware of microfractures, send it to me for proper disposal. or maybe its STFU n00b or maybe its do a search!!!! i dunno. i'm bored of this game.
|
|
|
|
|
edge
Feb 23, 2009, 12:54 AM
Post #3 of 66
(6184 views)
Shortcut
Registered: Apr 14, 2003
Posts: 9120
|
It is probably safe from a metallurgical standpoint. Or is it? If you have to ask here, or your partner is at all worried, then you need to get a new device. Think how bad you would feel if something happened because you wanted to save a few bucks. none of you will climb at 100% wondering about this. Dial in your systems so nothing like this happens to your new belay device.
(This post was edited by edge on Feb 23, 2009, 1:00 AM)
|
|
|
|
|
bandycoot
Feb 23, 2009, 2:20 AM
Post #4 of 66
(6125 views)
Shortcut
Registered: Nov 25, 2002
Posts: 2028
|
Inspect: if fine, then use.
(This post was edited by bandycoot on Feb 23, 2009, 2:20 AM)
|
|
|
|
|
currupt4130
Feb 23, 2009, 3:07 AM
Post #5 of 66
(6102 views)
Shortcut
Registered: Feb 7, 2008
Posts: 515
|
It bounced off his palm and landed in dirt? You're retarded if you go buy another device because you think that one is dangerous. That's no worse than tossing it to your partner and him not catching it... Jesus. I swear to god you're all way too fucking paranoid. I'm a safe person, but you have to draw the line somewhere.
|
|
|
|
|
d0nk3yk0n9
Feb 23, 2009, 3:17 AM
Post #6 of 66
(6094 views)
Shortcut
Registered: Jan 22, 2009
Posts: 182
|
Inspect it carefully. If you see anything at all that makes you (or your partner) worry, then retire it and get a new one. If you don't, then don't worry about it. However, if your partner is really worried about it, I'd get a new one (or have him chip in to get a new one) so that he's not focusing on that instead of on climbing.
|
|
|
|
|
coastal_climber
Feb 23, 2009, 3:30 AM
Post #7 of 66
(6078 views)
Shortcut
Registered: Nov 17, 2006
Posts: 2542
|
Have a look at the gate, does it close properly? Yes? Good to go.
|
|
|
|
|
pedro_sandchez
Feb 23, 2009, 3:38 AM
Post #8 of 66
(6070 views)
Shortcut
Registered: Oct 30, 2007
Posts: 31
|
Thanks for the input guys. It seems like the consensus is that it is okay. I apologize for the noobish question. I did some searches and there was nothing that really reflected a drop which I felt was similar to my scenario thus the reason for the perhaps redundant post. Of course for the rest of the day I belayed my partner on my backup belay device which I carry in the pack for exactly this type of scenario. I am convinced that the device is safe and I will continue to use it at least for myself. If he still isn't convinced and is insecure with it, then I can always use my backup belay for belaying him.
|
|
|
|
|
marc801
Feb 23, 2009, 3:39 AM
Post #9 of 66
(6070 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
coastal_climber wrote: Have a look at the gate, does it close properly? Yes? Good to go. The OP is asking about the belay device, not the biner, as evidenced by the subject of: "Dropped belay device still safe?" Do you even bother to read before you post a reply?
|
|
|
|
|
johnwesely
Feb 23, 2009, 3:46 AM
Post #10 of 66
(6066 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
marc801 wrote: coastal_climber wrote: Have a look at the gate, does it close properly? Yes? Good to go. The OP is asking about the belay device, not the biner, as evidenced by the subject of: "Dropped belay device still safe?" Do you even bother to read before you post a reply? The less you know about the thread, the easier it is to post whore.
|
|
|
|
|
coastal_climber
Feb 23, 2009, 6:22 AM
Post #11 of 66
(6019 views)
Shortcut
Registered: Nov 17, 2006
Posts: 2542
|
marc801 wrote: coastal_climber wrote: Have a look at the gate, does it close properly? Yes? Good to go. The OP is asking about the belay device, not the biner, as evidenced by the subject of: "Dropped belay device still safe?" Do you even bother to read before you post a reply? Hard day at the office?
|
|
|
|
|
majid_sabet
Feb 23, 2009, 6:35 AM
Post #12 of 66
(6012 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth?
(This post was edited by majid_sabet on Feb 23, 2009, 6:35 AM)
|
|
|
|
|
suilenroc
Feb 23, 2009, 6:48 AM
Post #13 of 66
(6000 views)
Shortcut
Registered: Nov 13, 2006
Posts: 581
|
majid_sabet wrote: ...so what is your life worth? yup.
|
|
|
|
|
USnavy
Feb 23, 2009, 6:52 AM
Post #14 of 66
(5994 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? Really... Hmmm. See I too read the same article but the actual results was 100% of the devices were safe. And it was REI that did the test. And it was on carabiners. REI found that all of their carabiners they dropped failed above their rating.
(This post was edited by USnavy on Feb 23, 2009, 6:25 PM)
|
|
|
|
|
Urban_Cowboy
Feb 23, 2009, 9:58 AM
Post #15 of 66
(5966 views)
Shortcut
Registered: Feb 3, 2009
Posts: 219
|
majid_sabet wrote: so what is your partner's life worth? FIFY I don't use/trust "iffy" gear, not that I'm made of money, but really, what is a life worth, and how bad would you feel if something failed that you knew was questionable? Chances are that it's fine, but this sport is dangerous enough as it is; why add to that?
|
|
|
|
|
the_leech
Feb 23, 2009, 4:33 PM
Post #16 of 66
(5902 views)
Shortcut
Registered: Feb 8, 2007
Posts: 392
|
majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? Yes, it's true. Major Sorbet has rediscovered MICROFRACTURES!!!!
|
|
|
|
|
shoo
Feb 23, 2009, 4:44 PM
Post #17 of 66
(5893 views)
Shortcut
Registered: Dec 22, 2006
Posts: 1501
|
USnavy wrote: Really... Hmmm. See I to read the same article but the actual results was 100% of the devices were safe. And it was REI that did the test. And it was on carabiners. REI found that all of their carabiners they dropped failed above their rating. This was in no way, shape, or form a definitive test. I am in the process of contacting the person originally in charge of this test to get more details. As far as I know, there hasn't been any definitive test proving or disproving the existence or effect of microfractures in dropped gear. Majid, would you care to link to that study you are citing?
|
|
|
|
|
blueeyedclimber
Feb 23, 2009, 4:52 PM
Post #18 of 66
(5884 views)
Shortcut
Registered: Nov 19, 2002
Posts: 4602
|
marc801 wrote: coastal_climber wrote: Have a look at the gate, does it close properly? Yes? Good to go. The OP is asking about the belay device, not the biner, as evidenced by the subject of: "Dropped belay device still safe?" Do you even bother to read before you post a reply? Did you? IF you read the post, you'll notice he said reverso AND attache (which is a biner). Just sayin' Josh
|
|
|
|
|
jeepnphreak
Feb 23, 2009, 4:53 PM
Post #19 of 66
(5881 views)
Shortcut
Registered: Jul 29, 2008
Posts: 1259
|
majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? Ut ohh, we have stats with out citations... How about a like to this atricle. Back on to the question... I think that its safe, asumming that your partners hand really did contact teh R3 first before it hit the ground. BUT being a paranoied PITA I would also retire it and get a new one just in case. IMHO my partner nor I are going to die over a $30 piece of eqipment that may be in question
|
|
|
|
|
reg
Feb 23, 2009, 4:55 PM
Post #20 of 66
(5879 views)
Shortcut
Registered: Nov 10, 2004
Posts: 1560
|
i dropped my reverso - hit the talus from about 200' up. didn't even bother lookin for it. but that's me
|
|
|
|
|
trenchdigger
Feb 23, 2009, 4:55 PM
Post #21 of 66
(5879 views)
Shortcut
Registered: Mar 9, 2003
Posts: 1447
|
majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? I'm calling BS as well. But what else is new? Reference please...
(This post was edited by trenchdigger on Feb 23, 2009, 4:57 PM)
|
|
|
|
|
marde
Feb 23, 2009, 5:03 PM
Post #23 of 66
(5860 views)
Shortcut
Registered: Sep 3, 2006
Posts: 169
|
trenchdigger wrote: majid_sabet wrote: Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? I'm calling BS as well. But what else is new? Reference please... majid is absolutely right, you won't be able to see internal fractures in aluminum like in most other materials except glass.
|
|
|
|
|
majid_sabet
Feb 23, 2009, 5:05 PM
Post #24 of 66
(5850 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
trenchdigger wrote: majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? I'm calling BS as well. But what else is new? Reference please... You call it BS cause you are Pendejo and can tell the difference between sh*t and burrito . Here smoke this (+==) chingon and come back when you feel like you know something.
|
|
|
|
|
trenchdigger
Feb 23, 2009, 5:07 PM
Post #25 of 66
(5847 views)
Shortcut
Registered: Mar 9, 2003
Posts: 1447
|
majid_sabet wrote: trenchdigger wrote: majid_sabet wrote: many years ago, one of the hardware mfgs dropped 100 hardware and did an extensive testing after each drop and discovered that almost 90+% of the dropped gear were fine but then you got the few which did not. Aluminum is not a metal that you can easily detect internal cracks or signs of stress by visual inspection. To be able to see stress factors, you must use an x-ray or do other test such as ultrasonic which YOU do not have at home so what is your life worth? I'm calling BS as well. But what else is new? Reference please... You call it BS cause you are Pendejo and can tell the difference between sh*t and burrito . Here smoke this (+==) chingon and come back when you feel like you know something. There's the majid I know...
|
|
|
|
|
|
|
|
|