|
caveman
Jul 17, 2004, 10:51 PM
Post #1 of 8
(1260 views)
Shortcut
Registered: Aug 7, 2002
Posts: 127
|
so I got a hagboard, and I want to mount it somehow, trouble is, it is too wide to put above a doorway, so what should I do? also how far below the ceiling should the top of the hangboard be to prevent my head from hitting the ceiling?
|
|
|
|
|
catbiter
Jul 17, 2004, 11:54 PM
Post #2 of 8
(1260 views)
Shortcut
Registered: Nov 12, 2003
Posts: 177
|
If the hangboard is too wide for your door you should take it back and get a smaller one. It has to be in a doorway of some type. I have my hangboard in my kitchen doorway. It's about 3 inches from the ceiling, and yes, I do hit my head if I go up too high. You just have to be careful.
|
|
|
|
|
caveman
Jul 18, 2004, 12:22 AM
Post #3 of 8
(1260 views)
Shortcut
Registered: Aug 7, 2002
Posts: 127
|
yeah a relative gave it to me so i can't return it and get a smaller one. Is there some way to just extend it out from a wall?
|
|
|
|
|
no_limit
Jul 18, 2004, 12:27 AM
Post #4 of 8
(1260 views)
Shortcut
Registered: Sep 1, 2002
Posts: 973
|
You could get some 2X4 pieces that match the width of the hangboard, and stack them behind it. You will need to get some longer bolts than the ones that came with the hangboard, though. -Alex
|
|
|
|
|
cin
Jul 18, 2004, 4:31 AM
Post #5 of 8
(1260 views)
Shortcut
Registered: Jan 26, 2004
Posts: 105
|
How is it too wide for the doorway? Do you mean that the holes in the board don't match the placement of the studs? If so, this isn't a problem... http://www.rockclimbing.com/photos.php?Action=Show&PhotoID=29992 This is my hangboard in my room. As you can see I used a 2"X12" floor joist which I bolted into the studs. then I just used the manufacturer-provided lag bolts to secure it to the wood. You could just as easily use 3/4" plywood and it would have been a bunch cheaper. (ask the lumber yard to look at their scraps. they'll let it go for a dollar) Now if by too wide you meant that it won't fit on that wall because the wall goes into a corner or something, then you will have to find another doorway. Try the closet, or somewhere in the garage. Now about hitting your head... ...I think everybody hits their head every once and a while. But if you've got like cathedral ceilings over your doorway, I suggest using a ladder and getting rt where the board will be and pretending that you're doing a pull-up. that will show you how low it needs to be. **caveman I hope that helps!**
|
|
|
|
|
andy_reagan
Jul 18, 2004, 2:24 PM
Post #6 of 8
(1260 views)
Shortcut
Registered: Jan 12, 2004
Posts: 1075
|
Metolius actually recomended that I back the hangboard with plywood screwed into the studs.
|
|
|
|
|
anykineclimb
Jul 19, 2004, 8:30 PM
Post #7 of 8
(1260 views)
Shortcut
Registered: Mar 30, 2003
Posts: 3593
|
you could always build a "box" on the wall to mount the hangboard. Just have it match the size of your board plus about 2-3 feet to get it away from the wall and you're set. just make sure you mount it to the ceiling and wall good. If you have a garage, are there exposed roof beams you can use?
|
|
|
|
|
rockprodigy
Jul 22, 2004, 4:11 PM
Post #8 of 8
(1260 views)
Shortcut
Registered: Sep 10, 2002
Posts: 1540
|
Hang it above a closet.
|
|
|
|
|
|