|
rockhugger
Oct 29, 2002, 3:56 AM
Post #1 of 5
(3013 views)
Shortcut
Registered: Aug 13, 2002
Posts: 419
|
I found a really interesting ice screw the other day at a used gear shop.The top had this this thumb actuated catch that caught in one of four notches in the top of the screw but when I pressed the catch I found that you can move the head along the whole length of the screw. So you can move the head down toward the surface of the ice and clip in close,kind of eliminates the need for all those different lengths.Now if we could just put a swivel on one of those and turn it into an express also then we would have the best damn screw anywhere.
|
|
|
|
|
bradhill
Oct 30, 2002, 5:34 AM
Post #2 of 5
(3013 views)
Shortcut
Registered: Mar 22, 2002
Posts: 486
|
Neat idea. I saw a site that was basically a museum of odd climbing hardwear and he had a lot of interesting and innovative stuff by Salewa, including a semi-mechanical ascender lighter than a tibloc. It seems like a really innovative company, but I'd never heard of them before last week. Anybody know anything more about them? I found their website, but it's all pretty standard stuff...
|
|
|
|
|
punk
Oct 30, 2002, 8:18 AM
Post #3 of 5
(3013 views)
Shortcut
Registered: May 28, 2002
Posts: 1442
|
Salewa - pronounced (Sa-Lee-Wa),
Is an German in origin company that being there for ever they are the one that makes 50% of Trango gear a really good and reputable company and one of the first climbing gear makers in Europe they were one of the first to come with the tubular design for the ice-screws (the old style Chouinard, and warthogs) and the first to come with the tube design for belay devices
|
|
|
|
|
apollodorus
Oct 30, 2002, 9:42 AM
Post #4 of 5
(3013 views)
Shortcut
Registered: Feb 18, 2002
Posts: 2157
|
Yeah, Salewa's been around for a LONG time. They made gear for Chouinard even before the tubular ice screw with its electron-beam welded carbide teeth that cut a core smaller than the tube itself, so it would fall out. And not many people are still around who could draw a picture of the Warthog ice piton (wasn't a screw at all, eh?). Salewa made the Chouinard-Frost crampons to their design for years.
I may be wrong on this one, but I think Salewa was also the first company to make the Sticht belay plate, the forerunner of the ATC and all other tube-type belay devices. It looked like a thick silver dollar with a slot in it. Later, there were versions with 11mm and 9mm slots, and then two 9mm slots. And then two 11mm slots, for rapping and fully preempting the ATC. Later still, they added a spring to keep it away from the carabiner, so it was easy to feed rope; holding the rope collapsed the spring.
|
|
|
|
|
rockhugger
Oct 31, 2002, 2:15 AM
Post #5 of 5
(3013 views)
Shortcut
Registered: Aug 13, 2002
Posts: 419
|
I'm going to go back and buy that ice screw ,the teeth were all bent but I'll just sharpen them with the dremel.Very carefully!I'll try to get a picture of it on here soon.
|
|
|
|
|
|
