 |

irene440
Sep 29, 2008, 4:17 AM
Post #1 of 2
(2542 views)
Shortcut
Registered: Sep 28, 2008
Posts: 8
|
I just got a nice shiny new slackline. I was set up with some gear, so i have 50 feet of webbing, 3 carabiners, 2 rap rings, and 2 loops of 1' webbing.I don't know how to set it up with the gear I have.
(This post was edited by irene440 on Sep 29, 2008, 4:23 AM)
|
|
|
 |
 |

slacklinejoe
Sep 30, 2008, 9:02 PM
Post #2 of 2
(2409 views)
Shortcut
Registered: Nov 5, 2003
Posts: 1423
|
Anything I put in quotes below, google it or search on youtube.com for videos or photos on each part of the setup. What you have isn't exactly beginner friendly, but it can certainly be setup with a little bit of research on your end. Your setup sounds like it was designed to have line lockers on each end which provide the adjustment on the main line. These are made from the rap rings and carabiners to avoid making knots in the mainline. Google "Line Lockers" and you'll find how to set that part of the system up. This will adjust your main line to fit the distance between the trees you have. The two loops of webbing get slung around the trees, usually in a "Girth Hitch". I suggest using http://images.google.com to see photos of the knot. One end of the mainline will be clipped to the sling and the other will be where you create the tensioning system. Setting up the tensioning system using carabiners is the most complicated part so I suggest searching on youtube.com for "setup slackline with carabiners" and watch several different videos a couple times to understand what is going on.
|
|
|
 |
 |
|
 |
|
|