|
alldeez
Oct 19, 2013, 10:22 PM
Post #1 of 5
(3691 views)
Shortcut
Registered: Oct 4, 2013
Posts: 8
|
I recently got a mammut sensor rope that has a very nice tapered finish on the ends. Basically it looks like in addition to the normal hot seal they shaved a bit of the rope sheath off to give it a slight taper.
I've found this is much less prone to wear than a normal straight cut w. tape on it, and it threads into knots easier.
I want to give my other rope this same end, just wondering if anyone knows is there any particular way this is normally done?
I have an old rope to practice on, I guess I can just take my knife and start shaving a bit of the sheath off at the end but seems like there must be a better technique to it.
cheers
|
|
Attachments:
|
taper2.jpg
(61.0 KB)
|
|
|
taper1.jpg
(58.8 KB)
|
|
|
|
|
marc801
Oct 20, 2013, 12:18 AM
Post #2 of 5
(3667 views)
Shortcut
Registered: Aug 1, 2005
Posts: 2806
|
Shape and form the taper with a hot (ie: really hot) butter knife or something similar.
|
|
|
|
|
5.samadhi
Oct 20, 2013, 2:18 PM
Post #3 of 5
(3618 views)
Shortcut
Registered: Jul 31, 2011
Posts: 98
|
tape end
cut rope in middle of tape
burn
|
|
|
|
|
gunkiemike
Oct 21, 2013, 10:55 PM
Post #4 of 5
(3509 views)
Shortcut
Registered: Oct 1, 2002
Posts: 2266
|
Less prone to wear?
Like fuzzing up on the LAST INCH of the rope is a big problem?
|
|
|
|
|
dac33
Nov 25, 2013, 12:02 PM
Post #5 of 5
(3231 views)
Shortcut
Registered: Feb 9, 2012
Posts: 44
|
I find a candle and crushing it between fingers works ok. Some people snip out a little of the core from end.
The main reason to do it is to make sure the end is less likely to snag on a rap.
|
|
|
|
|
|
