Forums: Climbing Information: Beginners: Top Rope Anchor gear: Edit Log




Idako


Aug 22, 2011, 12:13 AM

Views: 14333

Registered: May 2, 2011
Posts: 40

Top Rope Anchor gear
Report this Post
Average: avg_1 avg_2 avg_3 avg_4 avg_5 (0 ratings)  

Working on getting together a set of gear for setting up top rope anchors in a reasonable variety of scenarios, from the list below is there anything major missing?

- 2 double length slings
- 2 normal length slings
- 4 Locking carabiners
- 7 wiregate carabiners
- 30' 1" tubular webbing, climb-spec
- 2 pieces of 21' 7mm cord
- 60m rope

(Each climber has their own harness/belay device/ shoes etc)

Based on reading / discussion and lurking here this seems to be more than enough for any top rope setups, not including ones that would need nuts/cams/other gear.

In addition I was planning on tossing in a piece of carpet for protecting over the edge and a towel for potentially protecting a tree.

I was thinking like a 12"x12" piece of carpet would be enough, any thoughts? too big, too small?

Anything I am overlooking?

In case it's relevant this will be for gunks area climbing / peterskill.

Thanks for any input.

^^Edited to add:

I will be going out with more experienced climbers and possibly hiring a guide in the future, my purpose for posting this here is more for feedback as to whether I am missing anything for a basic "kit" for setting up a Top Rope anchor in most reasonable scenarios.(ie not needing to place pro)


(This post was edited by Idako on Aug 22, 2011, 9:10 PM)



Edit Log:
Post edited by Idako () on Aug 22, 2011, 3:17 AM
Post edited by Idako () on Aug 22, 2011, 9:10 PM


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?