|
|
|
|
p8ntballsk8r
Oct 12, 2009, 6:07 AM
Post #1 of 67
(17009 views)
Shortcut
Registered: Oct 12, 2009
Posts: 81
|
Curious what everyone thinks about attempting to climb a route that has more bolts than the number of quickdraws you have. The way I would go about this, is climb to the first 3 bolts as normal, and on the fourth, instead of hooking up a quickdraw, simply clip in a locking biner to the bolt, and also clip this to the rope. Of course locking it up afterwards. I do not see anything wrong with this, unless it would sideload the biner or cause something physics related wrong with the setup. My reason for choosing the 4th bolt (or higher) is as follows. We all know the 1st bolt is important, and the second bolt is the most important since missing this bolt, or falling while attempting to clip this will usually result in hitting the ground. If we used a locking biner instead of a quickdraw, and it were to whatever reason fail, we would hit the ground being at or above the second bolt without reaching the 3rd. My guess is the 3rd bolt will usually be high enough that this biner/quickdraw failing will result in a big fall, but the second bolt will still hold us and keep us from hitting the ground. I chose the 4th bolt to be absolutely sure, that I won't hit the ground, but now as i'm writing this, I'm thinking the 5th might be even better. In case of failure, the 4th bolt would protect us, and the 3rd bolt would back that up. I know this isn't necessary because the 4th bolt will hold, but I like redundancy, especially when my life is on the line. Let me know what you guys think!
|
|
|
|
|
shimanilami
Oct 12, 2009, 7:09 AM
Post #2 of 67
(17000 views)
Shortcut
Registered: Jul 24, 2006
Posts: 2043
|
Deja vu.
|
|
|
|
|
king_rat
Oct 12, 2009, 8:01 AM
Post #3 of 67
(16986 views)
Shortcut
Registered: Jul 20, 2005
Posts: 365
|
I would probably take the same approach, but use a locking biner on the last bolt, that way minimizing excess rope drag. I suppose if its safe to do so you could skip one of the top bolts(not ideal). Alternatively if you had any trad gear with you(I know its unlikely at a sport venue) you could make a quickdraw up out of either a trad draw, or by using the sling a cam or some other peace of gear.
|
|
|
|
|
cilohabmilc
Oct 12, 2009, 8:07 AM
Post #4 of 67
(16986 views)
Shortcut
Registered: Mar 11, 2004
Posts: 36
|
Don't bother counting bolts... a locker is a fine substitute for a quickdraw but is a pain in the neck to get clipped and locked (wasted time/energy) and if the route wanders at all you'll get a heck of a lot of rope drag. When you fall a draw will allow the rope end biner to hang free so that the rope has less of a chance of unclipping itself. A locking mechanism also keeps the rope from unclipping itself. Just make sure that the threads are pointed down so gravity won't unscrew the locker.
|
|
|
|
|
tradmanclimbs
Oct 12, 2009, 12:02 PM
Post #5 of 67
(16945 views)
Shortcut
Registered: Apr 24, 2003
Posts: 2599
|
The locker is totally safe just use it on whatever bolts are easiests to clip. Or use it on a crucial bolt that prevents fatal groundfall.
|
|
|
|
|
sungam
Oct 12, 2009, 12:42 PM
Post #6 of 67
(16921 views)
Shortcut
Registered: Jun 24, 2004
Posts: 26804
|
I would cancel beers with friends for a week and buy some new draws with the money you saved.
|
|
|
|
|
johnwesely
Oct 12, 2009, 12:48 PM
Post #7 of 67
(16918 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
I am going to go out on a limb and say you are probably over thinking this. I would just skip the last bolt or only use one draw no the anchor. I am assuming you like p8ntball. Last time I checked p8ntball is rather expensive. Don't go p8ntballing one or two times and buy a bunch of draws.
|
|
|
|
|
qwert
Oct 12, 2009, 1:05 PM
Post #8 of 67
(16914 views)
Shortcut
Registered: Mar 24, 2004
Posts: 2394
|
How bout reading this http://www.rockclimbing.com/..._reply;so=ASC;mh=25; or the even more recent thread we had on the subject, which i cant find at the moment. To sum it up: You can use a locker (or other single biner) on a bolt, and you probably will be safe. howeveer its a pain to clip, and it will increase rope drag. So if you have to do this, use a spot where you will not increase rope drag too much, or just do it at the last bolts, where you realize that you run out of draws. And if you know from the beginning that you are running out of draws, how about doing another route, or making some draws out of slings and biners? qwert
|
|
|
|
|
notapplicable
Oct 12, 2009, 2:19 PM
Post #9 of 67
(16878 views)
Shortcut
Registered: Aug 31, 2006
Posts: 17771
|
p8ntballsk8r wrote: Curious what everyone thinks about attempting to climb a route that has more bolts than the number of quickdraws you have. Skip as many bolts as your short quickdraws. Preferably high on the route but a lot of times the first bolt is a candidate because it's too close to the ground anyway.
|
|
|
|
|
angry
Oct 12, 2009, 5:08 PM
Post #10 of 67
(16790 views)
Shortcut
Registered: Jul 22, 2003
Posts: 8405
|
You need more than 3 quickdraws
|
|
|
|
|
milesenoell
Oct 12, 2009, 5:28 PM
Post #11 of 67
(16772 views)
Shortcut
Registered: Sep 19, 2006
Posts: 1156
|
+1 for just get more draws. If you have a decent number of draws you can probably get away with just skipping bolts, and if you don't, downclimb and grab the draws below the high point, then climb back up and use 'em again. I know his method blows 'cause I did it a number of times when I only had 6 draws, but at least it's safer than using the (non-locking) biners individually (which I also did).
|
|
|
|
|
yodadave
Oct 12, 2009, 5:32 PM
Post #12 of 67
(16768 views)
Shortcut
Registered: Feb 11, 2008
Posts: 510
|
angry wrote: You need more than 3 quickdraws laughing my ass off
|
|
|
|
|
p8ntballsk8r
Oct 12, 2009, 7:52 PM
Post #13 of 67
(16722 views)
Shortcut
Registered: Oct 12, 2009
Posts: 81
|
yodadave wrote: angry wrote: You need more than 3 quickdraws laughing my ass off I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have.
|
|
|
|
|
lena_chita
Moderator
Oct 13, 2009, 3:06 PM
Post #14 of 67
(16654 views)
Shortcut
Registered: Jun 27, 2006
Posts: 6087
|
p8ntballsk8r wrote: yodadave wrote: angry wrote: You need more than 3 quickdraws laughing my ass off I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have. Does your partner have some, too? Yes, you can skip some bolts in some occasions. Yes, you can clip a locking 'biner if you have to. But really, if you are serious about climbing, you will find that almost all the sport routes worth doing require more than 6 draws. Go buy some. Or quit climbing.
|
|
|
|
|
hafilax
Oct 13, 2009, 3:15 PM
Post #15 of 67
(16647 views)
Shortcut
Registered: Dec 12, 2007
Posts: 3025
|
p8ntballsk8r wrote: yodadave wrote: angry wrote: You need more than 3 quickdraws laughing my ass off I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have. If you've got some extra biners (lockers or non), buy 2 slings (or tie some with webbing or even cord).
|
|
|
|
|
photoguy190
Oct 13, 2009, 3:27 PM
Post #16 of 67
(16637 views)
Shortcut
Registered: Dec 30, 2006
Posts: 191
|
Why is dumb to buy one or two? Its not that much of a savings to buy in packs of 6, and it sounds like you need more. You can easily find draws for under $12 a piece. There might be nothing wrong with doing it your way, but if you start cutting corners in this sport cause you are cheap. You might as well sell the six draws you have and stick to paintballing
|
|
|
|
|
johnwesely
Oct 13, 2009, 3:30 PM
Post #17 of 67
(16635 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
p8ntballsk8r wrote: I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have. Why would it be stupid to buy only three. That is how many you need, and then you could climb the route safely instead of waiting until you have enough money to get a six pack.
|
|
|
|
|
xaniel2000
Oct 13, 2009, 4:42 PM
Post #18 of 67
(16600 views)
Shortcut
Registered: Oct 8, 2007
Posts: 99
|
how are you going to clean an 8 bolt route with 6 draws and 1 locking biner?
|
|
|
|
|
johnwesely
Oct 13, 2009, 4:46 PM
Post #19 of 67
(16594 views)
Shortcut
Registered: Jun 13, 2006
Posts: 5360
|
xaniel2000 wrote: how are you going to clean an 8 bolt route with 6 draws and 1 locking biner? Hold on really tight to the anchor, untie, and learn to retie in with one hand and teeth.
|
|
|
|
|
p8ntballsk8r
Oct 13, 2009, 5:42 PM
Post #21 of 67
(16551 views)
Shortcut
Registered: Oct 12, 2009
Posts: 81
|
johnwesely wrote: xaniel2000 wrote: how are you going to clean an 8 bolt route with 6 draws and 1 locking biner? Hold on really tight to the anchor, untie, and learn to retie in with one hand and teeth. Lol you made my day with this one. I'd use 2 locking biners to get to the chains.
|
|
|
|
|
hafilax
Oct 13, 2009, 5:49 PM
Post #22 of 67
(16547 views)
Shortcut
Registered: Dec 12, 2007
Posts: 3025
|
There's a story in one of the Smith Rock guide books about a guy on a long sport route. He sees that he's going to run out of draws so he splits the remaining placing one biner on the last few bolts. He gets to the anchor and has nothing left. Luckily there was chain connecting the bolts so he slung his leg over the chain, untied, fed the rope through the chain, retied and lowered. I think that was all for the flash.
|
|
|
|
|
kachoong
Oct 13, 2009, 5:52 PM
Post #23 of 67
(16545 views)
Shortcut
Registered: Jan 23, 2004
Posts: 15304
|
p8ntballsk8r wrote: yodadave wrote: angry wrote: You need more than 3 quickdraws laughing my ass off I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have. If you go onto a paintball field and there are eight enemies, do you just take six painballs or enough to hit them all? Or god-forbid extra, in case you need more?
|
|
|
|
|
shockabuku
Oct 13, 2009, 9:48 PM
Post #24 of 67
(16500 views)
Shortcut
Registered: May 20, 2006
Posts: 4868
|
I generally downclimb and backclean some gear. Or get more draws.
|
|
|
|
|
p8ntballsk8r
Oct 13, 2009, 10:57 PM
Post #25 of 67
(16481 views)
Shortcut
Registered: Oct 12, 2009
Posts: 81
|
kachoong wrote: p8ntballsk8r wrote: yodadave wrote: angry wrote: You need more than 3 quickdraws laughing my ass off I have six... I don't think it's possible to buy only 3 unless you get them separate which would be stupid. Anyways, I was trying to figure out a way to climb a 7 or 8 bolt route with only the 6 I have. If you go onto a paintball field and there are eight enemies, do you just take six painballs or enough to hit them all? Or god-forbid extra, in case you need more? Well hopefully you'd have better odds than 1 on 8. Kind of depends on what position you play, since I'm a forward I sprint to the 50 yardline, try to take out at least 1 guy, but my main job is callouts for my other players and forcing the other team into bad positions and hiding behind bunkers. I'd say for 8 guys I'd want 500+ paintballs. This is why I play forward so I don't have so waste so much paint/money. The guys who play back on our team shoot 1000-2000 paintballs in a single game, sometimes hoping to get just 1 guy out using the full case. Anyways, back on topic. Do some sport routes only have bolts or chains on the top without biners already there? If so do you throw way two biners on each route? Where I climb there are two biners attached to the chains so you don't leave any gear up. This way we only need 1 bail biner incase one is damaged or missing
|
|
|
|
|
|
|
|
|