|
michael1245
Dec 21, 2010, 7:42 PM
Post #1 of 53
(8827 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
What do you prefer to tie around a tree, for anchoring purposes? Why? Tubular Webbing Pro Cord Sling Other What's your preffered method? Why? Girth Hitch Other (tie around with a particular knot)
|
|
|
|
|
spikeddem
Dec 21, 2010, 7:47 PM
Post #2 of 53
(8812 views)
Shortcut
Registered: Aug 27, 2007
Posts: 6319
|
Are we assuming that we're top-roping, and that we have everything available?
|
|
|
|
|
michael1245
Dec 21, 2010, 7:49 PM
Post #3 of 53
(8807 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
yep. top-rope 24/7.
|
|
|
|
|
kaizen
Dec 21, 2010, 8:03 PM
Post #4 of 53
(8787 views)
Shortcut
Registered: Apr 17, 2009
Posts: 154
|
michael1245 wrote: What do you prefer to tie around a tree, for anchoring purposes? Why? Tubular Webbing Pro Cord Sling Other What's your preffered method? Why? Girth Hitch Other (tie around with a particular knot) If it's a small diameter bush or tree, I'll use a sling and girth hitch it to the tree. If I'm using webbing, I'll often tie an 8 on a bite near one end, wrap the long tail around the tree, pass it through the bite, and create a second 8 on a bite to connect to the anchor. While it's not the quickest method, it's much easier to untie after being weighted on top rope.
|
|
|
|
|
InDaDacks
Dec 21, 2010, 8:07 PM
Post #5 of 53
(8783 views)
Shortcut
Registered: Mar 24, 2010
Posts: 21
|
The simplest approach with chord is to use a figure 8 follow through tied directly around the tree, but this can make adjustments difficult. This also uses the bare minimum of gear. A second option would be to sling the tree (not necessarily girth hitch) and then use a clove hitch to attach your anchor line to the 'biner that joins the sling.
|
|
|
|
|
spikeddem
Dec 21, 2010, 8:12 PM
Post #6 of 53
(8769 views)
Shortcut
Registered: Aug 27, 2007
Posts: 6319
|
How big is the tree?
|
|
|
|
|
bill413
Dec 21, 2010, 8:13 PM
Post #7 of 53
(8769 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
1) Tubular Webbing: A) Webbing in loop, girth hitch tree B) Tie loop around tree with water knot 2) Static Line: A) Loop around tree with bowline on coil, or simple bowline. 3) Other cordage: Either as 2A or 1A, depending on if cordage is looped or not. I like the bowline because you don't have to guesstimate how long the rope around the tree needs to be. Easy to adjust, easy to untie. Make SURE to back it up with another knot. Choice between webbing or cordage totally depends on what we have carried to the top of the crag. Some setups can be easier with one or the other.
|
|
|
|
|
michael1245
Dec 21, 2010, 8:17 PM
Post #8 of 53
(8760 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
bill413 wrote: 1) Tubular Webbing: A) Webbing in loop, girth hitch tree B) Tie loop around tree with water knot 2) Static Line: A) Loop around tree with bowline on coil, or simple bowline. 3) Other cordage: Either as 2A or 1A, depending on if cordage is looped or not. I like the bowline because you don't have to guesstimate how long the rope around the tree needs to be. Easy to adjust, easy to untie. Make SURE to back it up with another knot. Choice between webbing or cordage totally depends on what we have carried to the top of the crag. Some setups can be easier with one or the other. to back up the bowline...what would you do? a saftey/fisherman knot on the end?
|
|
|
|
|
michael1245
Dec 21, 2010, 8:19 PM
Post #9 of 53
(8753 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
spikeddem wrote: How big is the tree? I'm in NJ/PA. An average sized man can hug or nearly hug most of the trees.
|
|
|
|
|
spikeddem
Dec 21, 2010, 8:21 PM
Post #10 of 53
(8751 views)
Shortcut
Registered: Aug 27, 2007
Posts: 6319
|
michael1245 wrote: spikeddem wrote: How big is the tree? I'm in NJ/PA. An average sized man can hug or nearly hug most of the trees. How far is it from the edge of the cliff?
|
|
|
|
|
michael1245
Dec 21, 2010, 8:28 PM
Post #11 of 53
(8745 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
you want to give me short/long scenario? I think the furthest I've seen is about 30 feet. Shortest, less than 10 feet.
|
|
|
|
|
Kartessa
Dec 21, 2010, 8:40 PM
Post #12 of 53
(8728 views)
Shortcut
Registered: Nov 18, 2008
Posts: 7362
|
*GASP!* Slinging trees is a mortal sin in these parts.
|
|
|
|
|
rocknice2
Dec 21, 2010, 8:45 PM
Post #13 of 53
(8721 views)
Shortcut
Registered: Jul 13, 2006
Posts: 1221
|
Your from Ontario. Everything is a sin.
|
|
|
|
|
bearbreeder
Dec 21, 2010, 8:52 PM
Post #14 of 53
(8706 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
says the guy from la belle (femme) province ... lol
|
|
|
|
|
michael1245
Dec 21, 2010, 8:56 PM
Post #15 of 53
(8700 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
Allamuchy, NJ is strictly NO BOLTS. There's a great practice wall and my first time there, my instructor had anchored us to two trees. I want to say they were about 30 feet from the edge. From what I remember, he had used a "rope". Not sure if it was cordage, static, or dynamic. Ralph Stover, PA has bolts in place. However, if I wanted to tie into a tree...I'm guessing that I have 10-20 feet before the edge, depending. Those are my locals.
|
|
|
|
|
majid_sabet
Dec 21, 2010, 9:00 PM
Post #16 of 53
(8696 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
wrap the webbing three times (aka W3P2) and tie it with a water knot. pull two string out and attach your TR biner. leave the knot in the front facing the master biner. for longer distance: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. if the TR biner is hanging over the edge. protect the rope by carpet, bag or whatever so it does not get cut. you can always do all these mombo jumbo clove hitch whatever but that is like creating unnecessary cluster.
|
|
|
|
|
bill413
Dec 21, 2010, 9:08 PM
Post #17 of 53
(8676 views)
Shortcut
Registered: Oct 19, 2004
Posts: 5674
|
michael1245 wrote: bill413 wrote: 1) Tubular Webbing: A) Webbing in loop, girth hitch tree B) Tie loop around tree with water knot 2) Static Line: A) Loop around tree with bowline on coil, or simple bowline. 3) Other cordage: Either as 2A or 1A, depending on if cordage is looped or not. I like the bowline because you don't have to guesstimate how long the rope around the tree needs to be. Easy to adjust, easy to untie. Make SURE to back it up with another knot. Choice between webbing or cordage totally depends on what we have carried to the top of the crag. Some setups can be easier with one or the other. to back up the bowline...what would you do? a saftey/fisherman knot on the end? I tie a fisherman's with the free end onto the strand in the coil. Here's video although I always use at least two wraps around the strand, not one as shown.
(This post was edited by bill413 on Dec 21, 2010, 9:15 PM)
|
|
|
|
|
ubu
Dec 21, 2010, 9:09 PM
Post #18 of 53
(8674 views)
Shortcut
Registered: Dec 17, 2008
Posts: 1485
|
majid_sabet wrote: wrap the webbing three times (aka W3P2) and tie it with a water knot. pull two string out and attach your TR biner. leave the knot in the front facing the master biner. for longer distance: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. if the TR biner is hanging over the edge. protect the rope by carpet, bag or whatever so it does not get cut. you can always do all these mombo jumbo clove hitch whatever but that is like creating unnecessary cluster. Just keep in mind that if you biner a figure 8 for the anchor in an area with high non-climber traffic, you just might find that biner missing by the end of your climb...
|
|
|
|
|
majid_sabet
Dec 21, 2010, 9:15 PM
Post #19 of 53
(8666 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
ubu wrote: majid_sabet wrote: wrap the webbing three times (aka W3P2) and tie it with a water knot. pull two string out and attach your TR biner. leave the knot in the front facing the master biner. for longer distance: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. if the TR biner is hanging over the edge. protect the rope by carpet, bag or whatever so it does not get cut. you can always do all these mombo jumbo clove hitch whatever but that is like creating unnecessary cluster. Just keep in mind that if you biner a figure 8 for the anchor in an area with high non-climber traffic, you just might find that biner missing by the end of your climb... it would be worse if the take the biner and drop the rope to hang on a rock and you TR on it
|
|
|
|
|
Kartessa
Dec 21, 2010, 9:17 PM
Post #20 of 53
(8662 views)
Shortcut
Registered: Nov 18, 2008
Posts: 7362
|
Hot Dawg! The "Ancient Cedars" lining our local crags have led to a toproping ban at the good crags. Jeluz much?
|
|
|
|
|
bearbreeder
Dec 21, 2010, 9:21 PM
Post #21 of 53
(8654 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
http://alpineinstitute.blogspot.com/2010/12/natural-anchors.html
(This post was edited by bearbreeder on Dec 21, 2010, 9:22 PM)
|
|
|
|
|
kachoong
Dec 21, 2010, 9:22 PM
Post #22 of 53
(8651 views)
Shortcut
Registered: Jan 23, 2004
Posts: 15304
|
majid_sabet wrote: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. If it's a decently-sized tree (>18in diameter) this is what I will do.
|
|
|
|
|
michael1245
Dec 21, 2010, 9:37 PM
Post #23 of 53
(8625 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
majid_sabet wrote: wrap the webbing three times (aka W3P2) and tie it with a water knot. pull two string out and attach your TR biner. leave the knot in the front facing the master biner. for longer distance: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. if the TR biner is hanging over the edge. protect the rope by carpet, bag or whatever so it does not get cut. you can always do all these mombo jumbo clove hitch whatever but that is like creating unnecessary cluster. ah ha, very nice. thanks for the explanation.
(This post was edited by michael1245 on Dec 21, 2010, 9:38 PM)
|
|
|
|
|
majid_sabet
Dec 21, 2010, 9:44 PM
Post #24 of 53
(8612 views)
Shortcut
Registered: Dec 13, 2002
Posts: 8390
|
michael1245 wrote: majid_sabet wrote: wrap the webbing three times (aka W3P2) and tie it with a water knot. pull two string out and attach your TR biner. leave the knot in the front facing the master biner. for longer distance: run a static cord and wrap one end three times. place an 8 and clip the 8 with one biner to rope. take the other end, put a fig 8 and attach your TR biner. if the TR biner is hanging over the edge. protect the rope by carpet, bag or whatever so it does not get cut. you can always do all these mombo jumbo clove hitch whatever but that is like creating unnecessary cluster. ah ha, very nice. thanks for the explanation. see the picture above
|
|
|
|
|
michael1245
Dec 22, 2010, 4:06 PM
Post #25 of 53
(8438 views)
Shortcut
Registered: Nov 23, 2010
Posts: 247
|
is it possible to use one rope on two trees? for example, you tie an achor to one tree and have like 50 feet of rope remaining, could you tie another anchor to a nearby tree with the same rope? explain, please?
|
|
|
|
|
|