|
alpwing
Feb 21, 2004, 9:11 PM
Post #1 of 9
(2986 views)
Shortcut
Registered: Feb 21, 2004
Posts: 9
|
hello could anybody please help me...do anybody knows..where can i get instructions..how to sharp the ice screws and ice pick? is that possible? anybody have some pictures about this..or there is some page on the net? thax.. and cya... have a great (climb) time!!! david
|
|
|
|
|
estwing
Feb 21, 2004, 10:27 PM
Post #2 of 9
(2986 views)
Shortcut
Registered: Mar 24, 2002
Posts: 344
|
You just need to buy a small file, called a flat bastard file (i'm not kidding). You then slide this back and forth over the edges that you wish to sharpen, being careful to maintain the original angles that were there. If you want to go crazy, you might also get a narrow sharpening stone, and use this after to put a razor edge on you equipment.
|
|
|
|
|
charfire
Feb 21, 2004, 10:30 PM
Post #3 of 9
(2986 views)
Shortcut
Registered: Nov 7, 2003
Posts: 5
|
Bastard files are best used in a motion that moves then across and up the surface you want to sharpen in one motion. If you don't see metal shavings coming off you aren't sharpening it.
|
|
|
|
|
|
|
|
gunked
Feb 22, 2004, 7:31 AM
Post #5 of 9
(2986 views)
Shortcut
Registered: Feb 1, 2002
Posts: 615
|
Hammer, that's a pretty cool link. I would add one thing though. To really get the screw working sweet, it's important to have all the teeth the same length. I sharpen my screws in a very similar fashion and even use a heavy polishing wheel on the outside edges on occasion. I also check the rails (part that holds the screw in to the ice) for burs and carefully file them off as well as wire-wheeling any rust off. Carefully remove any burs on the inside diameter where the base of cutting disc was used. When I'm done with all of this, I spray the outside and inside with silicone spray and let them dry. I generally respray them every couple of outings as they just go in nicer. One thing to keep in mind is that I'm a jeweler and have all of the necessary tools and experience to make this an easier job. My screw generally look like new when I'm done no matter how badly they were grounded out. If anybody is really having any trouble with this, PM me and we can work something out on price per screw(depending on how badly they are messed up) and I'll fix 'em fer ya. Now that I think about it, I can also email you a couple of pictures of my finished work if you want. Who knows, maybe this could become a business or something :roll: ?!? Good Luck -Jason :D
|
|
|
|
|
alpwing
Feb 22, 2004, 8:39 AM
Post #6 of 9
(2986 views)
Shortcut
Registered: Feb 21, 2004
Posts: 9
|
hellou:) wow...thanx realy for all your answers and all your help...! (gunked) - adrenaline junkie...about your ice screws...could you post that pictures here? on this forum? hm realy thanx...! and take care... david
|
|
|
|
|
alpwing
Feb 22, 2004, 6:26 PM
Post #7 of 9
(2986 views)
Shortcut
Registered: Feb 21, 2004
Posts: 9
|
khm...am..anybody else knows something about sharpening the screws...and have some techinc?:) cuz...i realy dont know how can i sharpen my screws..:)
|
|
|
|
|
gunked
Feb 22, 2004, 11:52 PM
Post #8 of 9
(2986 views)
Shortcut
Registered: Feb 1, 2002
Posts: 615
|
I'll get some pics together and post them in the next few days. I'm actually about to start on a few more screws that I'm doing for a friend of mine. I'll show you the before, during and after shots. They're old-school Chouinard screws that were not in the best shape. I plan to make them look and work like new. So it should be a good test of me putting my money where my mouth is! :roll: -Jason :D P.S. The "adrenaline junkie" part of my description is one of many titles that RC.com adds to your username depending on how many times you've posted on the site. "Red-point maniac" is another example.
|
|
|
|
|
alpwing
Feb 24, 2004, 11:10 AM
Post #9 of 9
(2986 views)
Shortcut
Registered: Feb 21, 2004
Posts: 9
|
hellou.. ok..thanx c ya david
|
|
|
|
|
|