|
Forums:
Climbing Information:
Gear Heads:
Re: [dovelette] I just don't get it - Trad rack questions:
Edit Log
|
|
moose_droppings
Feb 23, 2008, 2:32 AM
Views: 19220
Registered: Jun 7, 2005
Posts: 3371
|
Biners- wire gates are probably the best all around trad rack biner. Its all up in the air as to which kind, you'll hear a dozen different suggestions. Get a well respected brand name with an open gate strength of at least 8kn, 10kn is even better but a little more pricey usually. Runners- Another depends who you ask, but I'd say go with 2' x 5/8ths nylon. Get a t least a couple of 4' ones too. Can't hardly beat these for the price and quality. http://cgi.ebay.com/...QQrdZ1QQcmdZViewItem Cams- What you got listed is a good starting point, maybe a couple smaller ones. Ask others in areas where you climb which ones are needed the most. Quadcams and tri cams_ Four lobe or three lobe cams. Three Cam Units place in smaller slots and can be a little trickier to place than the Four Cam Units. Go to different cam manufactuers sites and read all the different specs. Stoppers- ABC's are plenty good enough. As usual this will get as many different answers as there are different kinds. cord-o-let- Approximently 20' of 7mm perlon cord tied in a loop with a double fisherman's knot and used for building anchors, has other uses in a pinch. daisy chain- Forget a daisy for now. set of hex's- Depends, but yes I like them and use mostly the larger half of the set and prefer them wired. *note* sets the drag on the reel and waits edited to add:
shoo wrote: In the time of typing this, three other people already answered. Damn. ditto what shoo said.
(This post was edited by moose_droppings on Feb 23, 2008, 2:44 AM)
|
|
|
|
|
|
|