|
Paul_W
Oct 21, 2010, 10:24 PM
Post #1 of 20
(4161 views)
Shortcut
Registered: Sep 13, 2010
Posts: 30
|
Saw the treatise on quick draws but my question is more specific. Like to hear from experienced ice climbers on what they have found to be the best quick draw biner set up for ice routes. thanks in advance for your expert advice.
|
|
|
|
|
gunkiemike
Oct 21, 2010, 11:21 PM
Post #2 of 20
(4133 views)
Shortcut
Registered: Oct 1, 2002
Posts: 2266
|
Something that you can work with gloves on. So...how big are your hands?
|
|
|
|
|
dr_feelgood
Oct 22, 2010, 12:53 AM
Post #3 of 20
(4095 views)
Shortcut
Registered: Apr 6, 2004
Posts: 26060
|
big wiregates.
|
|
|
|
|
qwert
Oct 22, 2010, 6:40 AM
Post #5 of 20
(4022 views)
Shortcut
Registered: Mar 24, 2004
Posts: 2394
|
Wiregates and not to small. And maybe not hotforged. They seem to catch quite a bit more ice than non hotforged ones. Its not that big of a problem, but if you really want carabiners specifically for ice, i would avoid them. Or is it just me/ the conditions i climb in ? qwert
|
|
|
|
|
USnavy
Oct 22, 2010, 9:00 AM
Post #6 of 20
(4014 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
qwert wrote: Wiregates and not to small. And maybe not hotforged. They seem to catch quite a bit more ice than non hotforged ones. Its not that big of a problem, but if you really want carabiners specifically for ice, i would avoid them. Or is it just me/ the conditions i climb in ? qwert I am not saying your wrong, but what does the forgoing have to do with it? What is the difference in end product between biners that have been hot forged and ones that have been cold forged?
|
|
|
|
|
redlude97
Oct 22, 2010, 9:19 AM
Post #7 of 20
(4009 views)
Shortcut
Registered: Aug 27, 2008
Posts: 990
|
USnavy wrote: qwert wrote: Wiregates and not to small. And maybe not hotforged. They seem to catch quite a bit more ice than non hotforged ones. Its not that big of a problem, but if you really want carabiners specifically for ice, i would avoid them. Or is it just me/ the conditions i climb in ? qwert I am not saying your wrong, but what does the forgoing have to do with it? What is the difference in end product between biners that have been hot forged and ones that have been cold forged? he probably means ibeam hot forged
|
|
|
|
|
brownie710
Oct 22, 2010, 10:59 AM
Post #8 of 20
(3996 views)
Shortcut
Registered: Aug 25, 2007
Posts: 531
|
i use bd hotwires for ice and neutrinos for trad
|
|
|
|
|
qwert
Oct 22, 2010, 11:27 AM
Post #9 of 20
(3990 views)
Shortcut
Registered: Mar 24, 2004
Posts: 2394
|
redlude97 wrote: USnavy wrote: qwert wrote: Wiregates and not to small. And maybe not hotforged. They seem to catch quite a bit more ice than non hotforged ones. Its not that big of a problem, but if you really want carabiners specifically for ice, i would avoid them. Or is it just me/ the conditions i climb in ? qwert I am not saying your wrong, but what does the forgoing have to do with it? What is the difference in end product between biners that have been hot forged and ones that have been cold forged? he probably means ibeam hot forged Yes. They have way more irregularities where ice can form. As said, its not a real big issue, but it is noticeable (for me) qwert
|
|
|
|
|
Paul_W
Oct 22, 2010, 5:27 PM
Post #10 of 20
(3935 views)
Shortcut
Registered: Sep 13, 2010
Posts: 30
|
Thanks, all. looks like the consensus is wire gates but not too small. thanks, good climbing!
|
|
|
|
|
the_climber
Oct 23, 2010, 6:43 AM
Post #11 of 20
(3862 views)
Shortcut
Registered: Oct 9, 2003
Posts: 6142
|
When it really comes down to it... I'm not that picky. As long as it works. All that being said. I tend to prefer full sized wire gate biners (ie. DMM specter, BD Wire oval,... ). In reality, I really do take whatever is racked on the slings I grab on the way out of the house. Wire gates have the advantage of clearing ice/freeze-up easier, but you still have to watch for gates freezing up is wet conditions.
|
|
|
|
|
c4c
Oct 23, 2010, 11:04 AM
Post #12 of 20
(3850 views)
Shortcut
Registered: Jun 18, 2006
Posts: 1279
|
OP 5.0 wiregates w/ yates ice screamers
|
|
|
|
|
error
Oct 28, 2010, 10:06 PM
Post #13 of 20
(3691 views)
Shortcut
Registered: Oct 28, 2008
Posts: 69
|
I use a mix of Wild Country Xenons + Heliums + 15&60 cm Dyneema + will add some Screamers this winter.
|
|
|
|
|
granite_grrl
Oct 30, 2010, 2:00 AM
Post #14 of 20
(3629 views)
Shortcut
Registered: Oct 25, 2002
Posts: 15084
|
I'm going to go against popular opinion here and say that small wiregates are pretty good for ice climbing. Lets face it, you're never going to finger clip with a pair of gloves on, you're just going to mash the rope in there. small biner that you can get you whole hand around is pretty good for mashing. Just saying.
|
|
|
|
|
gunkiemike
Oct 31, 2010, 5:00 PM
Post #15 of 20
(3580 views)
Shortcut
Registered: Oct 1, 2002
Posts: 2266
|
granite_grrl wrote: Lets face it, you're never going to finger clip with a pair of gloves on, ... I "finger clip" all the time on ice. In the biner gate is facing me, why would I want to do it any other way? If the gloves I have are so fat that I can't do that, then I either should relegate them to belaying, or go (it's too cold). Mike
|
|
|
|
|
daneburns
Nov 1, 2010, 12:42 AM
Post #16 of 20
(3517 views)
Shortcut
Registered: Jul 14, 2004
Posts: 70
|
That is easy, 2 BD Oz wire gates and a Mammut Shock Absorber Dyneema runner.
(This post was edited by daneburns on Nov 1, 2010, 12:56 AM)
|
|
|
|
|
Paul_W
Nov 9, 2010, 7:48 PM
Post #17 of 20
(3385 views)
Shortcut
Registered: Sep 13, 2010
Posts: 30
|
Thanks for continued replies. I'm leaning to picking up some hotwires and using a combination of muy other full size biners. Thanks again. Re slings/draws, saw one recommendation for a yates screamer and one for mammut shock absorber (which I assume is something similar in that it would soften the blow?). I have never climbed with screamers on ice as it seemed too much bother. It seems simpler just to use a regular sling or draw. Do others routinely use "screamer" type slings on ice?
|
|
|
|
|
shoo
Nov 9, 2010, 8:30 PM
Post #18 of 20
(3372 views)
Shortcut
Registered: Dec 22, 2006
Posts: 1501
|
Paul_W wrote: Thanks for continued replies. I'm leaning to picking up some hotwires and using a combination of muy other full size biners. Thanks again. Re slings/draws, saw one recommendation for a yates screamer and one for mammut shock absorber (which I assume is something similar in that it would soften the blow?). I have never climbed with screamers on ice as it seemed too much bother. It seems simpler just to use a regular sling or draw. Do others routinely use "screamer" type slings on ice? I don't understand how it would be any less simple to use a screamer than a regular dogbone, and it definitely adds a level of safety in most cases. Honestly, the only reasons you wouldn't use them on the majority of ice routes is cost and a little added weight. I personally use two draws with screamers as dogbones. I'd use more, but they're pricey.
|
|
|
|
|
Paul_W
Nov 10, 2010, 3:00 AM
Post #19 of 20
(3345 views)
Shortcut
Registered: Sep 13, 2010
Posts: 30
|
Shoo - thanks for you comment. your reply in part answers the question. cost, determining which piece to place a "screamer" on etc. and the versitility of normal extendable draws, the quality of the newer ice screws etc. seems to argue for a rack with simplicity in mind. I'm going to get some more info on this. Regards, Paul W
|
|
|
|
|
bearbreeder
Nov 10, 2010, 7:17 AM
Post #20 of 20
(3327 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
dont worry about the price on screamers ... the yates ones are like 16$ or so ... and weight ~50g ... so assuming 30+ g biners ... thats 120 or so total weight you hopefully wont be falling too much ... so you shouldnt need to replace too many
|
|
|
|
|
|