|
|
|
|
USnavy
Dec 22, 2012, 12:48 PM
Post #52 of 64
(6923 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
bearbreeder wrote: USnavy wrote: First of all, the guy you emailed was not "Petzl," but rather likely some sales rep who could very well know less about climbing than many of the senior members of this forum. If the guy is actually a solid climber, he knows that statement was bullshit but he had to say it for liability reasons. Second, the GriGri is one of the most commonly used devices in slacklining. We use it to serve as a mechanical brake to stop the pulley system from despooling. When using the GriGri as a brake in long slacklines, the force subjected to the GriGri is far greater than what is normally seen in the climbing world, and the device is always operated "hands free" with nothing holding the rope. To date I have never heard of a GriGri randomly slipping without being overloaded. My GriGri has likely had over 100 hours of "hands free" time on it holding my slackline. I normally tension my longline in excess of 2,000 lbf which means the GriGri has to hold in excess of 400 lbf. at times. since you believe its perfectly fine to take the hand right off the brake when rapping or belaying by implication once its loaded I never said anything like that. I said the GriGri in my slackline is able to hold a load without a hand on the rope. I always keep my hand on the rope when belaying - no exceptions. However, if I am rappelling and doing route work, I will take my hand off the rope, but I still tie a back-up knot most of the time. But I do not tie a back-up knot in the rope because I think the GriGri is some how going to magically decam and drop me. I tie a knot in the rope in case I drop my drill on the GriGri and jam the cam open inadvertently or something of the like.
(This post was edited by USnavy on Dec 22, 2012, 12:53 PM)
|
|
|
|
|
patto
Dec 22, 2012, 12:50 PM
Post #53 of 64
(6921 views)
Shortcut
Registered: Nov 15, 2005
Posts: 1453
|
bearbreeder wrote: oh GOD mista PATTO ... i just explained it to you ... when yr swinging over the place with a measuring tape, leaning over, etc ... there is the possibility that something will catch or bump In which case you are talking about forcing the cam open.
bearbreeder wrote: youre obviously too LAZY to take a few seconds to tie a knot with your partners life on the line ... do you even let them know youre going to take your hand off the brake ???? ... or do you make that decision for em without informing em No you are just making stuff up.
|
|
|
|
|
bearbreeder
Dec 22, 2012, 12:52 PM
Post #55 of 64
(6917 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
patto wrote: bearbreeder wrote: oh GOD mista PATTO ... i just explained it to you ... when yr swinging over the place with a measuring tape, leaning over, etc ... there is the possibility that something will catch or bump In which case you are talking about forcing the cam open. bearbreeder wrote: youre obviously too LAZY to take a few seconds to tie a knot with your partners life on the line ... do you even let them know youre going to take your hand off the brake ???? ... or do you make that decision for em without informing em No you are just making stuff up. 100% safe ???? ... lol things can catch on the handle or bump the cam ... its THAT simple which is what the video of the OP was doing ... swinging, leaning, clothing getting close to the lever, measuring tape on the air ... unlikely but no more so than a fcukang true factor 2 fall without a belay device on some weird dyneema anchor
(This post was edited by bearbreeder on Dec 22, 2012, 12:59 PM)
|
|
|
|
|
namoclimber
Dec 22, 2012, 6:30 PM
Post #57 of 64
(6867 views)
Shortcut
Registered: Dec 18, 2005
Posts: 118
|
The gri gri is a fairly safe device for hands free. That being said, I have worked in a climbing gym for 15 years and can tell you I always tie a back up knot below the device just in case. In that time i have only had one issue with the device slipping and was caught by the knot. Enough said. Be safe, be smart. (all it takes is to unweight the device and it will slip)
|
|
|
|
|
USnavy
Dec 22, 2012, 11:59 PM
Post #58 of 64
(6848 views)
Shortcut
Registered: Nov 6, 2007
Posts: 2667
|
bearbreeder wrote: USnavy wrote: I never said anything like that. I said the GriGri in my slackline is able to hold a load without a hand on the rope. I always keep my hand on the rope when belaying - no exceptions. well if its 100% safe like some people claim ... then why bother putting your hand on the rope then ???? You are talking about two different phenomena. The GriGri may be able to support a load without assistance once the cam is locked, but you need to hold the rope to initiate the locking of the cam. That is why I hold the rope. Without drag on the brake side of the rope, the rope can slide through the GriGri on a fall without locking.
|
|
|
|
|
bearbreeder
Dec 23, 2012, 12:16 AM
Post #59 of 64
(6836 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
USnavy wrote: You are talking about two different phenomena. The GriGri may be able to support a load without assistance once the cam is locked, but you need to hold the rope to initiate the locking of the cam. That is why I hold the rope. Without drag on the brake side of the rope, the rope can slide through the GriGri on a fall without locking. actually im talking about when the cam is fully engaged and your climber is resting on the rope ... why bother keeping your brake hand on or trying it off ... again ... hint ... things can get bumped or catch on the lever
namoclimber wrote: The gri gri is a fairly safe device for hands free. That being said, I have worked in a climbing gym for 15 years and can tell you I always tie a back up knot below the device just in case. In that time i have only had one issue with the device slipping and was caught by the knot. Enough said. Be safe, be smart. (all it takes is to unweight the device and it will slip) i agree its generally pretty "safe" ... but all it takes is having one issue without the backup/brake hand and youre bear food ... or even worse or better, your partner is
|
|
|
|
|
patto
Dec 23, 2012, 12:28 AM
Post #60 of 64
(6823 views)
Shortcut
Registered: Nov 15, 2005
Posts: 1453
|
namoclimber and USnavy have hit the nail on the head. Also note, for any other people reading this, nobody here has advocated NOT tying backup knots. All that has been claimed is that under some conditions the GriGri will securely hold without needed a brake hand.
|
|
|
|
|
bearbreeder
Dec 23, 2012, 12:50 AM
Post #61 of 64
(6816 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
patto wrote: namoclimber and USnavy have hit the nail on the head. Also note, for any other people reading this, nobody here has advocated NOT tying backup knots. All that has been claimed is that under some conditions the GriGri will securely hold without needed a brake hand. unless something goes bump or catches ... which is very possible with the guy swinging, leaning, playing with tapes, etc .. in the video i think other people who read this know pretty well thats quite possible .. its basic safety procedure ... which is ironic in a video about the safety of gear
|
|
|
|
|
jliungman
Dec 23, 2012, 3:36 PM
Post #62 of 64
(6762 views)
Shortcut
Registered: Dec 19, 2012
Posts: 7
|
bearbreeder wrote: patto wrote: namoclimber and USnavy have hit the nail on the head. Also note, for any other people reading this, nobody here has advocated NOT tying backup knots. All that has been claimed is that under some conditions the GriGri will securely hold without needed a brake hand. unless something goes bump or catches ... which is very possible with the guy swinging, leaning, playing with tapes, etc .. in the video i think other people who read this know pretty well thats quite possible .. its basic safety procedure ... which is ironic in a video about the safety of gear Was i not 100% clear in my previous post that the guy has a backup knot out of view? Why make assumptions based on a few seconds of vid? Can we stick to the topic instead?
|
|
|
|
|
bearbreeder
Dec 23, 2012, 7:29 PM
Post #63 of 64
(6747 views)
Shortcut
Registered: Feb 2, 2009
Posts: 1960
|
my apologies then now go put a belay device in the system ... when was the last time you belayed up a pitch without one, or a munter/hip belay
(This post was edited by bearbreeder on Dec 23, 2012, 7:34 PM)
|
|
|
|
|
Syd
Dec 23, 2012, 8:25 PM
Post #64 of 64
(6732 views)
Shortcut
Registered: Oct 25, 2012
Posts: 300
|
USnavy wrote: You are talking about two different phenomena. The GriGri may be able to support a load without assistance once the cam is locked, but you need to hold the rope to initiate the locking of the cam. That is why I hold the rope.
In reply to: nobody here has advocated NOT tying backup knots. It seems some are suggesting that when the cam is locked, all is OK. All it takes for failure is a slight unloading by the climber, then a slowish re-uptake, especially with a new thin rope.
|
|
|
|
|
|