|
mr_dirt
Oct 16, 2004, 4:09 AM
Post #26 of 29
(2168 views)
Shortcut
Registered: Sep 13, 2004
Posts: 24
|
I did what aulwes did, but better! I got Forest to sew a short sling under half the size of the original for aid then sewed a double sling round' it. The whole thing is only about two inches longer when not doubled! I put them like this on my two newer micro-camalots, works great! I am sure Forest would do this again if you ask (although this was several years ago). I also imagine Yates or someone would do this too, it’s easy enough.
|
|
|
|
|
david.yount
Deleted
Oct 16, 2004, 10:25 AM
Post #27 of 29
(2168 views)
Shortcut
Registered:
Posts:
|
Nice job on the tiny primary sling for short clip in for aiding.
And then you have a 48-inch runner sewn through this tiny primary sling? Or do you have a 24-inch loop as the secondary sling?
david yount.
|
|
|
|
|
tn_traddie
Oct 17, 2004, 11:31 AM
Post #28 of 29
(2168 views)
Shortcut
Registered: Oct 13, 2004
Posts: 28
|
In reply to: I did what aulwes did, but better! I got Forest to sew a short sling under half the size of the original for aid then sewed a double sling round' it. The whole thing is only about two inches longer when not doubled! I put them like this on my two newer micro-camalots, works great! I am sure Forest would do this again if you ask (although this was several years ago). I also imagine Yates or someone would do this too, it’s easy enough.
I'm having a hard time picturing this......can you send a pic please? Thanks!
|
|
|
|
|
mr_dirt
Oct 20, 2004, 1:15 AM
Post #29 of 29
(2168 views)
Shortcut
Registered: Sep 13, 2004
Posts: 24
|
Well, I don’t have a camera so let me try to clarify. The primary sling is 3 inches (from end to end) made of 18mm dynema; a 12 inch sling is then doubled trough that. The whole thing is 9 inches short and 15 inches long. I found however that racking on the short loop caused the long sling to get tangled easily, so I just rack on the long one. Hope this helps.
|
|
|
|
|
|
